> JBL JBL GT5A604E 4 way Car Amplifier

JBL Control 2 PS - 2-way active speaker for control applica ... Read more

JBL Control 2 PS - 2-way active speaker for control applications or installations (5.25"/0.75"), internal amplifier (2x 35W), 111dB maximum SPL, volume control, frequency response: 80Hz-20kHz, plastic housing, XLR and jack input, RCA input, 3.5mm headphones output. Dimensions: 235 x 159 x 143mm. Weight: 2.6kg. Colour: Black. Optional wallmount available (MTC 2P). PA/Live Equipment / Fullrange Speaker Cabinets Minimize

The Edge range of 4-way coaxial speakers combine stunning d ... Read more

The Edge range of 4-way coaxial speakers combine stunning design and performance in an end product which sets a new edge against the competition. The unique electroplated IMPP cone has been formulated to offer increased bass response whilst the PEI midrange and tweeter units offer crystal clear highs. The range of size options available ensure that Edge coaxial speakers are a direct fit for almost every vehicle on the market today. Speaker Size: 5.25 (130mm) RMS Power: 70 watts Peak Power: 210 watts Mounting Depth: 54mm Recommended Amplifiers: ED7400/7800, ED71600 Minimize

JBL MS-A1004 - 4-channel CAR AMPLIFIER SPECIFICATIONS: MS S ... Read more

JBL MS-A1004 - 4-channel CAR AMPLIFIER SPECIFICATIONS: MS SERIES SYSTEM INTEGRATION DIGITAL PROCESSOR / AMPLIFIER. 4-channel car amplifier 100 watts RMS x 4 (2 to 4 ohms) 200 watts RMS x 2 (2 to 4 ohms) CEA-2006 compliant Selectable high- and low-pass filters (20-20K Hz; 6, 12, or 24 dB/octave) Optional wireless remote bass controller (automatically pairs with multiple JBL MS Series amps) Class-D amplifier design Digital signal processing settings stored in non-volatile memory, no settings lost if power is disconnected Input mixer distributes signal without need for Y-cables Speaker-level inputs (RCA adapters included) "Hi2" input setting provides factory system amps with output loads, eliminating "speaker disconnected" error messages CD for system setup included Preamp inputs and outputs Output level controls fuse rating: 30A x 2 Dimensions: 7-3/16"W x 2-3/4"H x 8-1/4"D BL's stylish MS Series "Tiny" amps measure only 7" by 8" so you can tuck one into virtually any hiding place that has adequate ventilation Minimize

With the Vibe Slick 40 - V3 coaxial speakers, You can expec ... Read more

With the Vibe Slick 40 - V3 coaxial speakers, You can expect sharp, tight bass sounds thanks to the stiffened IMPP cone and hard PU surround incorporating fastbass technology. The Vibe Slick 40 - V3 speakers are a 2 way coaxial configuration which enables the slick speakers to have shallow euro fit baskets with wider but shallower magnets for maximum ease of installation where space is tight allowing the slick speakers to be installed into virtually every vehicle on the market today. All slick speakers feature a new bigger, oversized PowerTweeter able to deliver powerful sharper mids and treble. The slick speakers are a welcome new addition to the vibe range offering slick performance and looks at a price that will allow a complete slick install. Here at vibe we are consistently establishing our position at the forefront of product innovation within the ice industry. The new slick speaker range is no exception to that rule, with outstanding acoustic innovation and advanced design technology. The slick speakers certainly live up to their name, slick style with slick performance. We have designed these speakers to deliver up power in true VIBE fashion. Speaker Size 4" 10cm Type co-axial Max Power 150w RMS Watts 25w Depth 45mm Mounting Diameter 85mm Sensitivity 88db Freq Responce 66hz- 25khz Voice Coil Diameter 25mm Magnet Weight 5.3oz Minimize

The Edge range of 4-way coaxial speakers combine stunning d ... Read more

The Edge range of 4-way coaxial speakers combine stunning design and performance in an end product which sets a new edge against the competition. The unique electroplated IMPP cone has been formulated to offer increased bass response whilst the PEI midrange and tweeter units offer crystal clear highs. The range of size options available ensure that Edge coaxial speakers are a direct fit for almost every vehicle on the market today. Technical Details of ED205 Speakers Speaker Size: 5" (130mm). RMS Power: 50 watts. Peak Power: 150 watts. Recommended Amplifier: ED7400/7800, ED71600. Minimize

JBL MS-A5001 - mono (1 channel) CAR AMPLIFIER SPECIFICATION ... Read more

JBL MS-A5001 - mono (1 channel) CAR AMPLIFIER SPECIFICATIONS: MS SERIES SYSTEM INTEGRATION DIGITAL PROCESSOR / AMPLIFIER. Mono subwoofer amplifier 500 watts RMS x 1 (2 to 4 ohms) CEA-2006 compliant Selectable high- and low-pass filters (20-140 Hz; 6, 12, or 24 dB/octave) Optional wireless remote bass controller (automatically pairs with multiple JBL MS amps - MS-WBC) Class-D amplifier design Digital signal processing settings stored in non-volatile memory, no settings lost if power is disconnected Speaker-level inputs (RCA adapters included) "Hi2" input setting provides factory system amps with output loads, eliminating "speaker disconnected" error messages CD for system setup included Preamp inputs and outputs Output level controls fuse rating: 40A x 2 8-gauge power and ground leads and an 80-amp fuse recommended wiring and hardware not included with amplifier 7-3/16"W x 2-3/4"H x 8-1/4"D BL's stylish MS Series "Tiny" amps measure only 7" by 8" so you can tuck one into virtually any hiding place that has Minimize

Vibe Slick 5 COMP 2-way 240W component speakers Vibe are c ... Read more

Vibe Slick 5 COMP 2-way 240W component speakers Vibe are consistently establishing their position at the forefront of product innovation within the ICE industry. The new Slick speaker range is no exception to that rule, with outstanding acoustic innovation and advanced design technology. The Slick speakers certainly live up to their name, Slick style with Slick performance. They have designed these speakers to deliver up power in true Vibe fashion. You can expect sharp, tight bass sounds thanks to the stiffened IMPP cone and hard PU surround incorporating Fastbassâ"¢ technology. These Slick speakers are a 2 way component configuration which enables the Slick speakers to have shallow euro fit baskets with wider but shallower magnets for maximum ease of installation where space is tight allowing the speakers to be installed into virtually every vehicle on the market today. The new bigger PEI PowerTweeterâ"¢ is able to deliver powerful sharper mids and treble. Type : Component Configuration : 2-way Speaker Size : 5.25â?³ RMS Power : 80 w Minimum Input : 40 w RMS Peak Power : 240 w Sensitivity : 90 db Freq. Response : 60 Hz - 25 khz Impedance : 4 Ohms Mounting Depth : 56mm Mounting Diameter : 100 mm Voice Coil Diameter : 25 mm Magnet material : Ferrite Magnet weight : 10 Oz Magnet rating : Y30 Recommended Amplifiers : SLICK a0/a1 Minimize

JBL Control 2 PM, active 2-way speaker for control applicat ... Read more

JBL Control 2 PM, active 2-way speaker for control application or installations, 5,25" 0,75", internal amplifier with 2x 35 Watts, 111 dB SPL max, Volume, frequencyrange: 80 - 20.000 Hz, plastic housing, XLR and Jack input, RCA input, 3,5 mm headphones out, black, dimensions: 235 x 159 x 143 mm, weight: 2,6 Kg optional wallmount available (MTC 2P) PA/Live Equipment / Fullrange Speaker Cabinets Minimize

SLICK is VIBE's entry level product, making VIBE performanc ... Read more

SLICK is VIBE's entry level product, making VIBE performance and design affordable to everyone. Rubber detailing gives the entire range a unique and appealing look, feel and sound. The Slick range features coaxial speakers, stereo and mono amplifiers, subwoofers and the SLR enclosures. Rubber gasket ensures a perfect seal when mounting the speaker. Single ferrite magnet provides motor strength and high power handling. Single spider provides control and stability of the woofer cone. Offers extended high frequency response. Shallow mounting depth and aslim manget profile allows maximum installation flexibility. Single ferrite magnet provides motor strength and high power handling. Rigid injection moulded polypropylene woofer cone delivers smooth low frequency response. Spade terminal allows ease of installation with minimal terminal protrusion. Cast aluminium angular torsion chassis offers superior strength and thermal power handling. Inverted concave rubber surround geometrys. Rubber magnet boot protects the magnet and can be removed for shallower installation depth. Minimize

You are Buying a Brand New JBL MS-A1004 - 4 Channel Car Amp ... Read more

You are Buying a Brand New JBL MS-A1004 - 4 Channel Car Amp Amplifier Specifications: MS SERIES SYSTEM INTEGRATION DIGITAL PROCESSOR / AMPLIFIER. 4-channel car amplifier 100 watts RMS x 4 (2 to 4 ohms) 200 watts RMS x 2 (2 to 4 ohms) CEA-2006 compliant Selectable high- and low-pass filters (20-20K Hz; 6, 12, or 24 dB/octave) Optional wireless remote bass controller (automatically pairs with multiple JBL MS Series amps) Class-D amplifier design Digital signal processing settings stored in non-volatile memory, no settings lost if power is disconnected Input mixer distributes signal without need for Y-cables Speaker-level inputs (RCA adapters included) "Hi2" input setting provides factory system amps with output loads, eliminating "speaker disconnected" error messages CD for system setup included Preamp inputs and outputs Output level controls fuse rating: 30A x 2 Dimensions: 7-3/16"W x 2-3/4"H x 8-1/4"D Minimize

This JBL 'Creature II' set of three black speakers comes wi ... Read more

This JBL 'Creature II' set of three black speakers comes with a powerful, large 15W subwoofer, for a clean, low bass sound, and two smaller 5W speakers, all with an input sensitivity of 400mV RMS. Their easy-to-use interface allows you to change the volume with just a touch, and they are designed to work with all digital music players, computers, stereos and portable listening devices. Minimize

The Edge range of 4-way coaxial speakers combine stunning d ... Read more

The Edge range of 4-way coaxial speakers combine stunning design and performance in an end product which sets a new edge against the competition. The unique electroplated IMPP cone has been formulated to offer increased bass response whilst the PEI midrange and tweeter units offer crystal clear highs. The range of size options available ensure that Edge coaxial speakers are a direct fit for almost every vehicle on the market today. Speaker Size: 4" (100mm). RMS Power: 40 watts. Peak Power: 120 watts. Mounting Depth: 43mm. Minimize

You are Buying a Brand New JBL GTO-504EZ - 4 Channel Amplif ... Read more

You are Buying a Brand New JBL GTO-504EZ - 4 Channel Amplifier Car Amp Amplifier Specifications: 4-channel amplifier, bridgeable into 3 or 2-channel mode. 50 watts RMS x 4 at 4 ohms (75 watts RMS x 4 at 2 ohms) 150 watts RMS x 2 bridged at 4 ohms (4-ohm stable in bridged mode) Frequency response: 20-23,000 Hz Class AB amp technology Variable low- and high pass filters (40-220 Hz, 12 dB/octave) Variable bass boost on rear channels (0-12 dB at 45 Hz) Simple Setup System with test tone CD for perfect gain setting routing switch for 2-channel sources Preamp outputs Preamp and speaker-level inputs (speaker wire-to-RCA adapters included) Switchable automatic signal-sensing turns on amp without need for remote lead Fuse rating: 20A x 2 8-gauge power and ground leads recommended wiring and hardware not included with amplifier Dimensions: 8-3/8"W x 2-9/16"H x 9-11/16"D Brand New UK stock item with standard UK manufacturer's warranty. DELIVERY TO OTHER UK-NON MAINLAND ADDRESSES (SUCH AS N. Minimize

JBL GTO-1004 4-CHANNEL CAR AMPLIFIER. BRAND NEW UK STOCK WI ... Read more

JBL GTO-1004 4-CHANNEL CAR AMPLIFIER. BRAND NEW UK STOCK WITH ONE YEARS WARRANTY. P&P TO IRELAND (NORTH & SOUTH), CHANNEL ISLANDS, JERSEY, ISLE OF MAN, SHETLANDS will cost £15.00 total (ie UK non-mainland addresses). Main features: JBL GTO-1004 100 watts RMS x 4 channel at 4 ohms 150 watts RMS x 4 channel at 2 ohms 225 watts RMS x 2 channel at 4 ohms 3 channel mode: 2 x 100W RMS + 200W RMS for sub Ratings at 14.4V supply Variable HIGH & LOW Pass cross-overs Variable Bass Boost. Rear Bass Boost control Rear Crossover Filter selector Rear Crossover Frequency control Overload protection RCA Aux output to connect to another amp Signal-to-Noise (dBA) 104dBA (reference rated power into 4 ohms) THD 0.02% (rated power at 4 ohms) Frequency Response 10Hz - 100kHz (-3dB) Dimensions (L x W x H) 18-9/16" x 10-3/8" x 2-1/8" Minimize

Edge range of 4-way coaxial speakers combine stunning desig ... Read more

Edge range of 4-way coaxial speakers combine stunning design and performance in an end product which sets a new edge against the competition. The unique electroplated IMPP cone has been formulated to offer increased bass response whilst the PEI midrange and tweeter units offer crystal clear highs. The range of size options available ensure that Edge coaxial speakers are a direct fit for almost every vehicle on the market today. One of our favourite and most popular speakers. Minimize

The Edge range 6.5" 165mm 17cm ED206 is a 4-way coaxial spe ... Read more

The Edge range 6.5" 165mm 17cm ED206 is a 4-way coaxial speaker boasting stunning design with performance to match. Edge sets a new standard for the competition to try and follow. The unique electroplated IMPP cone has been formulated to offer increased bass response whilst the PEI midrange and tweeter units offer crystal clear highs. The range of size options available ensure that Edge coaxial speakers are a direct fit for almost every vehicle on the market today. 6.5" (165mm) 4-way speakers RMS Power: 60 watts Peak Power: 180 watts Mounting Depth: 57mm Minimize

The FLI Integrator speakers have been specifically designed ... Read more

The FLI Integrator speakers have been specifically designed to deliver a full range sound that seamlessly integrates treble, midrange and bass. The Comp 5 full speaker system consists of mid range driver, tweeter, crossover system and a complete fitting kit as pictured. Each component is perfectly matched and balanced, offering consistent levels of bass, mid and treble throughout the speaker's entire performance range, whether pushed to the limit or played more gently. The 13cm standard mount speakers are sensibly sized in terms of mounting depth at only 54mm and so will be convenient to install into most vehicles with the minimum of fuss. The tweeters come with both flush and surface mounts and the crossovers are especially neat, with pre-installed cable making the connection task a cinch. A neat pair of speaker grilles completes the look. Actual sonic performance is undoutably class leading - much of this is attributable to the super stiff, yet lightweight cone design which really sets this apart from the also-ran component systems on the market. An outstanding system which we feel confident to recommend warmly to any enthusiast looking to upgrade their speaker system from either the factory deck or an appropriate aftermarket amp. Minimize

jbl gto 1004 4 channel car amplifier with wiring kit specif ... Read more

jbl gto 1004 4 channel car amplifier with wiring kit specifications 100 watts rms x 4 channel at 4 ohms 150 watts rms x 4 channel at 2 ohms 225 watts rms x 2 channel at 4 ohms 3 channel mode 2 x 100 w rms 200 w rms for sub ratings at 14 4 v supply variable high low pass cross overs variable bass boost rear bass boost control rear crossover filter selector rear crossover frequency control overload protection rca aux output to connect to another amp signal to noise dba 104 dba reference rated powe Minimize

JBL PRX 635 Active 3-Way Full-Range Speaker - 1x 15", 1x 6. ... Read more

JBL PRX 635 Active 3-Way Full-Range Speaker - 1x 15", 1x 6.5" & 1x 1.5" speakers, 41Hz-19kHz, integrated Crown amplifier (3x 500Watt), 135 dB SPL max, internal DSP Controller, black housing, 90° x 50°, switchable EQ for speech and music, switchable input level, volume, combi-input, XLR male out, neodymium speakers M10 flying studs. Dimensions: 921 x 429 x 413mm (H x W x D). Weight: 27.2kg, optional Cover 260569 PA/Live Equipment / Fullrange Speaker Cabinets Minimize

you are buying a brand new jbl gto 1001 ez mono bass amplif ... Read more

you are buying a brand new jbl gto 1001 ez mono bass amplifier car amplifier specifications mono subwoofer amplifier 650 watts rms x 1 at 4 ohms 1 000 watts rms x 1 at 2 ohms cea 2006 compliant frequency response 10 280 hz class d amp technology variable low pass filter 40 280 hz 12 db octave variable bass boost 0 12 db at 45 hz simple setup system with test tone cd for perfect gain setting optional wired remote level controller available soon preamp and speaker level inputs speaker wire to rca Minimize