> TIMBER GARAGE DOOR

Wooden Garage 16' x 10' We are pleased to offer a FREE Vort ... Read more

Wooden Garage 16' x 10' We are pleased to offer a FREE Vortex Solar Light when you purchase any of our Traditional Heavy Duty Timber Garages. The Vortex light offers a powerful mains free lighting solution, with 36 white LEDs and three lighting modes, this light allows operation with 12, 24 or all 36 LEDs. Supplied with a high capacity battery pack, charged daily by a highly efficient Poly-crystalline solar panel. This wooden garage is manufactured from 12mm tongue and groove redwood shiplap cladding which comes dip treated with a water based preservative. To ensure longevity it is recommended the garage is treated with a top coat upon installation, and annually thereafter.  This timber garage boasts 44 x 44mm framing throughout with diagonal side bracing. Each garage is fitted with a substantial roof truss system for additional strength. The garage is fitted with double doors to the front as well as a side door, these are both framed and braced in 70 x 44mm timber. There are many options available to adapt this garage to your needs for example, premier cladding, various felt and many additional security options. Standard features: Dip treated with a water based preservative 12mm Shiplap Cladding Joinery opening windows 552 x 400mm Joinery standards throughout. Double door 1880 x 2135mm Single door 1775 x 762cm Both doors are framed and braced in 70x44mm timber 3x Substantial roof truss system 70x44mm Heavy duty framing of 44x44mm 44x44mm framing throughout with diagonal side bracing Heavy duty roof felt Eaves height: 1895mm Ridge height:  2595mm   Options: 15mm Tanalised cladding 22mm (before planed) premier shiplap cladding 4', 5', 6' or 7' fully framed 70x44mm double doors Lock and Key Security Options Felt Options Please note: Installation is only available within area a (green) shown on the map below. Delivery notice: Delivery is FREE to the areas highlighted in green on the map below. Delivery charges apply to zones highlighted in red, yellow and purple. Please select your delivery zone from the drop down menu below. Delivery to offshore PO postcodes will take place once a month and will also incur an additional charge. Please enquire before ordering if this might apply to you. Minimize

Wooden Garage 20' x 10' We are pleased to offer a FREE Vort ... Read more

Wooden Garage 20' x 10' We are pleased to offer a FREE Vortex Solar Light when you purchase any of our Traditional Heavy Duty Timber Garages. The Vortex light offers a powerful mains free lighting solution, with 36 white LEDs and three lighting modes, this light allows operation with 12, 24 or all 36 LEDs. Supplied with a high capacity battery pack, charged daily by a highly efficient Poly-crystalline solar panel. This wooden garage is manufactured from 12mm tongue and groove redwood shiplap cladding which comes dip treated with a water based preservative. To ensure longevity it is recommended the garage is treated with a top coat upon installation, and annually thereafter.  This timber garage boasts 44 x 44mm framing throughout with diagonal side bracing. Each garage is fitted with a substantial roof truss system for additional strength. The garage is fitted with double doors to the front as well as a side door, these are both framed and braced in 70 x 44mm timber. There are many options available to adapt this garage to your needs for example, premier cladding, various felt and many additional security options. Standard features: Dip treated with a water based preservative 12mm Shiplap Cladding Joinery opening windows 552 x 400mm Joinery standards throughout. Double door 1880 x 2135mm Single door 1775 x 762cm Both doors are framed and braced in 70x44mm timber 3x Substantial roof truss system 70x44mm Heavy duty framing of 44x44mm 44x44mm framing throughout with diagonal side bracing Heavy duty roof felt Eaves height: 1895mm Ridge height:  2595mm Options: 15mm Tanalised cladding 22mm (before planed) premier shiplap cladding 4', 5', 6' or 7' fully framed 70x44mm double doors Lock and Key Security Options Felt Options Please note: Installation is only available within area a (green) shown on the map below. Delivery notice: Delivery is FREE to the areas highlighted in green on the map below. Delivery charges apply to zones highlighted in red, yellow and purple. Please select your delivery zone from the drop down menu below. Delivery to offshore PO postcodes will take place once a month and will also incur an additional charge. Please enquire before ordering if this might apply to you. Minimize

Wooden Garage 20' x 12' We are pleased to offer a FREE Vort ... Read more

Wooden Garage 20' x 12' We are pleased to offer a FREE Vortex Solar Light when you purchase any of our Traditional Heavy Duty Timber Garages. The Vortex light offers a powerful mains free lighting solution, with 36 white LEDs and three lighting modes, this light allows operation with 12, 24 or all 36 LEDs. Supplied with a high capacity battery pack, charged daily by a highly efficient Poly-crystalline solar panel. This wooden garage is manufactured from 12mm tongue and groove redwood shiplap cladding which comes dip treated with a water based preservative. To ensure longevity it is recommended the garage is treated with a top coat upon installation, and annually thereafter.  This timber garage boasts 44 x 44mm framing throughout with diagonal side bracing. Each garage is fitted with a substantial roof truss system for additional strength. The garage is fitted with double doors to the front as well as a side door, these are both framed and braced in 70 x 44mm timber. There are many options available to adapt this garage to your needs for example, premier cladding, various felt and many additional security options. Standard features: Dip treated with a water based preservative 12mm Shiplap Cladding Joinery opening windows 552 x 400mm Joinery standards throughout. Double door 1880 x 2135mm Single door 1775 x 762cm Both doors are framed and braced in 70x44mm timber 3x Substantial roof truss system 70x44mm Heavy duty framing of 44x44mm 44x44mm framing throughout with diagonal side bracing Heavy duty roof felt Eaves height: 1895mm Ridge height:  2690mm Options: 15mm Tanalised cladding 22mm (before planed) premier shiplap cladding 4', 5', 6' or 7' fully framed 70x44mm double doors Lock and Key Security Options Felt Options Please note: Installation is only available within area a (green) shown on the map below. Delivery notice: Delivery is FREE to the areas highlighted in green on the map below. Delivery charges apply to zones highlighted in red, yellow and purple. Please select your delivery zone from the drop down menu below. Delivery to offshore PO postcodes will take place once a month and will also incur an additional charge. Please enquire before ordering if this might apply to you. Minimize

Wooden Garage 16' x 12' We are pleased to offer a FREE Vort ... Read more

Wooden Garage 16' x 12' We are pleased to offer a FREE Vortex Solar Light when you purchase any of our Traditional Heavy Duty Timber Garages. The Vortex light offers a powerful mains free lighting solution, with 36 white LEDs and three lighting modes, this light allows operation with 12, 24 or all 36 LEDs. Supplied with a high capacity battery pack, charged daily by a highly efficient Poly-crystalline solar panel. This wooden garage is manufactured from 12mm tongue and groove redwood shiplap cladding which comes dip treated with a water based preservative. To ensure longevity it is recommended the garage is treated with a top coat upon installation, and annually thereafter.  This timber garage boasts 44 x 44mm framing throughout with diagonal side bracing. Each garage is fitted with a substantial roof truss system for additional strength. The garage is fitted with double doors to the front as well as a side door, these are both framed and braced in 70 x 44mm timber. There are many options available to adapt this garage to your needs for example, premier cladding, various felt and many additional security options. Standard features: Dip treated with a water based preservative 12mm Shiplap Cladding Joinery opening windows 552 x 400mm Joinery standards throughout. Double door 1880 x 2135mm Single door 1775 x 762cm Both doors are framed and braced in 70x44mm timber 3x Substantial roof truss system 70x44mm Heavy duty framing of 44x44mm 44x44mm framing throughout with diagonal side bracing Heavy duty roof felt Eaves height: 1895mm Ridge height:  2690mm Options: 15mm Tanalised cladding 22mm (before planed) premier shiplap cladding 4', 5', 6' or 7' fully framed 70x44mm double doors Lock and Key Security Options Felt Options Please note: Installation is only available within area a (green) shown on the map below. Delivery notice: Delivery is FREE to the areas highlighted in green on the map below. Delivery charges apply to zones highlighted in red, yellow and purple. Please select your delivery zone from the drop down menu below. Delivery to offshore PO postcodes will take place once a month and will also incur an additional charge. Please enquire before ordering if this might apply to you. Minimize

Wooden Garage 18' x 12' We are pleased to offer a FREE Vort ... Read more

Wooden Garage 18' x 12' We are pleased to offer a FREE Vortex Solar Light when you purchase any of our Traditional Heavy Duty Timber Garages. The Vortex light offers a powerful mains free lighting solution, with 36 white LEDs and three lighting modes, this light allows operation with 12, 24 or all 36 LEDs. Supplied with a high capacity battery pack, charged daily by a highly efficient Poly-crystalline solar panel. This wooden garage is manufactured from 12mm tongue and groove redwood shiplap cladding which comes dip treated with a water based preservative. To ensure longevity it is recommended the garage is treated with a top coat upon installation, and annually thereafter.  This timber garage boasts 44 x 44mm framing throughout with diagonal side bracing. Each garage is fitted with a substantial roof truss system for additional strength. The garage is fitted with double doors to the front as well as a side door, these are both framed and braced in 70 x 44mm timber. There are many options available to adapt this garage to your needs for example, premier cladding, various felt and many additional security options. Standard features: Dip treated with a water based preservative 12mm Shiplap Cladding Joinery opening windows 552 x 400mm Joinery standards throughout. Double door 1880 x 2135mm Single door 1775 x 762cm Both doors are framed and braced in 70x44mm timber 3x Substantial roof truss system 70x44mm Heavy duty framing of 44x44mm 44x44mm framing throughout with diagonal side bracing Heavy duty roof felt Eaves height: 1895mm Ridge height:  2690mm Options: 15mm Tanalised cladding 22mm (before planed) premier shiplap cladding 4', 5', 6' or 7' fully framed 70x44mm double doors Lock and Key Security Options Felt Options Please note: Installation is only available within area a (green) shown on the map below. Delivery notice: Delivery is FREE to the areas highlighted in green on the map below. Delivery charges apply to zones highlighted in red, yellow and purple. Please select your delivery zone from the drop down menu below. Delivery to offshore PO postcodes will take place once a month and will also incur an additional charge. Please enquire before ordering if this might apply to you. Minimize

Wooden Garage 14' x 10' We are pleased to offer a FREE Vort ... Read more

Wooden Garage 14' x 10' We are pleased to offer a FREE Vortex Solar Light when you purchase any of our Traditional Heavy Duty Timber Garages. The Vortex light offers a powerful mains free lighting solution, with 36 white LEDs and three lighting modes, this light allows operation with 12, 24 or all 36 LEDs. Supplied with a high capacity battery pack, charged daily by a highly efficient Poly-crystalline solar panel. This wooden garage is manufactured from 12mm tongue and groove redwood shiplap cladding which comes dip treated with a water based preservative. To ensure longevity it is recommended the garage is treated with a top coat upon installation, and annually thereafter.  This timber garage boasts 44 x 44mm framing throughout with diagonal side bracing. Each garage is fitted with a substantial roof truss system for additional strength. The garage is fitted with double doors to the front as well as a side door, these are both framed and braced in 70 x 44mm timber. There are many options available to adapt this garage to your needs for example, premier cladding, various felt and many additional security options. Standard features: Dip treated with a water based preservative 12mm Shiplap Cladding Joinery opening windows 552 x 400mm Joinery standards throughout. Double door 1880 x 2135mm Single door 1775 x 762cm Both doors are framed and braced in 70x44mm timber 1x Substantial roof truss system 70x44mm Heavy duty framing of 44x44mm 44x44mm framing throughout with diagonal side bracing Heavy duty roof felt Eaves height: 1895mm Ridge height:  2595mm Options: 15mm Tanalised cladding 22mm (before planed) premier shiplap cladding 4', 5', 6' or 7' fully framed 70x44mm double doors Lock and Key Security Options Felt Options Please note: Installation is only available within area a (green) shown on the map below. Delivery notice: Delivery is FREE to the areas highlighted in green on the map below. Delivery charges apply to zones highlighted in red, yellow and purple. Please select your delivery zone from the drop down menu below. Delivery to offshore PO postcodes will take place once a month and will also incur an additional charge. Please enquire before ordering if this might apply to you. Minimize

Wooden Garage 14' x 12' We are pleased to offer a FREE Vort ... Read more

Wooden Garage 14' x 12' We are pleased to offer a FREE Vortex Solar Light when you purchase any of our Traditional Heavy Duty Timber Garages. The Vortex light offers a powerful mains free lighting solution, with 36 white LEDs and three lighting modes, this light allows operation with 12, 24 or all 36 LEDs. Supplied with a high capacity battery pack, charged daily by a highly efficient Poly-crystalline solar panel. This wooden garage is manufactured from 12mm tongue and groove redwood shiplap cladding which comes dip treated with a water based preservative. To ensure longevity it is recommended the garage is treated with a top coat upon installation, and annually thereafter.  This timber garage boasts 44 x 44mm framing throughout with diagonal side bracing. Each garage is fitted with a substantial roof truss system for additional strength. The garage is fitted with double doors to the front as well as a side door, these are both framed and braced in 70 x 44mm timber. There are many options available to adapt this garage to your needs for example, premier cladding, various felt and many additional security options. Standard features: Dip treated with a water based preservative 12mm Shiplap Cladding Joinery opening windows 552 x 400mm Joinery standards throughout. Double door 1880 x 2135mm Single door 1775 x 762cm Both doors are framed and braced in 70x44mm timber 1x Substantial roof truss system 70x44mm Heavy duty framing of 44x44mm 44x44mm framing throughout with diagonal side bracing Heavy duty roof felt Eaves height: 1895mm Ridge height:  2690mm Options: 15mm Tanalised cladding 22mm (before planed) premier shiplap cladding 4', 5', 6' or 7' fully framed 70x44mm double doors Lock and Key Security Options Felt Options Please note: Installation is only available within area a (green) shown on the map below. Delivery notice: Delivery is FREE to the areas highlighted in green on the map below. Delivery charges apply to zones highlighted in red, yellow and purple. Please select your delivery zone from the drop down menu below. Delivery to offshore PO postcodes will take place once a month and will also incur an additional charge. Please enquire before ordering if this might apply to you. Minimize

A large heavy duty timber workshop / garage with a host of ... Read more

A large heavy duty timber workshop / garage with a host of features. Built to our customers design in heavy duty cladding of 22mm on our standard heavy duty framing. The adjoining log store measures 4'x7' (1.22 x 2.14m)  The main building measures 20' x 12' (6 x 3.66m). The main features of this particular building are: 22mm T&G cladding on a heavy duty frame on 50x50mm 12mm T&G roof 12mm T&G cladding floor boards on tanalised floor bearers 27 degree roof pitch One set of round windows Transverse apex design 4' solid double doors (door and a half) 8' double doors in one end 4 Fixed windows Red Felt tiles Fully installed Higher eaves Log store without a floor All our sheds are manufactured in our own workshops to the highest of standards in the old fashioned way. Each building is lovingly hand made by trained carpenters with selected, 5th grade redwood cladding on a substantial heavy duty frame. Every building is made specifically for a customer on order and is tailored to your own individual requirements. All our own manufactured buildings feature the following as standard; Heavy duty framing of 2"x2" (50 x 50mm) as standard with top and bottom rails of 2"x1½" (50 x 38mm).the timber is of a high grade and planed smooth. Clad in 22mm 5th Grade Tongue and Grooved Shiplap, well seasoned Swedish red wood pine to ensure relatively knot free boards.  The boards are secured to the framing by high quality galvanised nails. Roofs are manufactured from 12mm tongue and groove boards of the same quality as our cladding ,an exterior grade 11mm O.S. Board is also available at no extra cost should you require this.  Our roofs are then covered with 20kg green roofing felt as standard however a higher quality, heavy duty felt is available as are also felt tiles. Roofs can even be adapted to take heavier coverings such as clay pan tiles. Windows: All our windows are hand made in the old fashioned way using mortise and tennon joints and secured with high quality wood glue and star dowels. Each window has drip sills under the glass. The glass is beaded with mitred beading on a bed of silicone. Double glazing can also be supplied if required Doors: Standard doors are 5'10" high x 2'6" wide (1554 x 792mm) made from 12mm tongue and groove boards on a fully framed, ledged and braced structure and hung on three galvanized tee hinges. All doors are fitted with a mortise keyed lock and round handle as standard. Drip strips above for added weather protection If you are interested in a bespoke shed then please contact us to discuss your own requirements such as the layout of the building, as many permeations are possible. You may have additional requirements such as alternative cladding, security hinges, double doors, stable doors, heavy duty locks, security windows or skylights. Several other options are also available; strengthened floors, partitions, and even roll on - roll off roofs. We specialise mainly in bespoke buildings. If you would like to have a building built to your dimensions or specifications whether it be a small kennel or a 6 bedroom log cabin then please contact us to discuss your requirements.  Please note: Unlike many of our other products this shed does attract an additional charge if delivery is outside of the NR and IP postcodes. Please see the drop down list below for the delivery charge applicable to your area. Minimize

A 12' x 8' (3.66 x 2.44m) Taylors Classic Timber Garage, ma ... Read more

A 12' x 8' (3.66 x 2.44m) Taylors Classic Timber Garage, manufactured in our bespoke workshops. Our garages are popular across the UK and are manufactured to the highest of standards in a traditional way. Each building is hand made by our team of trained carpenters from selected 5th grade redwood boards. The 12mm boards are hand selected to ensure a relativity knot free product. This cladding is secured to the thick 2"x2" (50x50mm) planed smooth square framing by high quality galvanised nails. Each panel is checked from start to finish for precision and accuracy, avoiding faults which can often derive from mass production. Our garages can either be manufactured so they sit flat on a base or altered slightly so the outer cladding hangs below the base rail and fits the concrete base to prevent water entering the building. If you have this option your base will need to be a precise measurement, please contact us for details. Standard Features: These garages are built to the very highest quality and offer complete flexibility because they are hand made to order. The construction, design and attention to detail surpasses other garages on the UK market, please see our support information page or download a brochure for more details but the following lists a few key points: Our buildings are hand made by our team of trained carpenters with each panel checked from start to finish for precision and accuracy, avoiding faults which can often derive from mass machine production. The wood used throughout the garage is 5th grade, well seasoned, Swedish red wood. Framing and boards are planned smooth for  the best finish and each timber is hand selected to ensure a relativity knot free building. Both the Single & Double Garage Doors are made from 12mm T&G boards which are fully Framed, Ledged and Braced with 2x2" framing. The single side access door is hung on three brass pinned galvanized tee hinges and fitted with a keyed rim lock and round handle. The garage doors fit on substantial Crank, Hook and Band galvanised hinges, bolted for security & finished with a galvanised sliding pad bolt. Four fixed windows, each of which window is hand made in our own workshops with morticed and tenoned joints providing a substantial frame. The 4mm horticultural glass is fixed with mitred beading on a bed of clear silicone. Our roofs are manufactured from 12mm T&G boards supported by 2"x2" purlins, a central heavy duty 'A' framed truss along with two slave trusses and finished with 20kg green roofing felting. FREE Dip Treatment Garage Dimensions: Gable Width: 2438mm (8') Side Length: 3657mm (12') Ridge Height: 2438mm (8') Eaves Height: 2011mm (6'6") Garage doors: 1889 x 2316mm (6'2" high x 7'6" wide) Single Door:  1554 x 792mm (5�10" high x 2�6" wide) Windows: 610 x 610mm (2' x 2') Options: 22mm Heavy Duty Cladding Heavy Duty Roofing Felt or Felt Tiles Tanalisation Toughened Glass Opening Windows Built to your Specific Requirements. This garage can be manufactured to your own requirements because it is made to order. The height, doors or windows can be extended or the overall size reduced and our framing can be increased to 3"x2" or even 4"x2". Cladding can also be pressure treated or hand painted. Insulation packs for the roof can be included as well as the interior walls insulated and lined. Our Workshops can produce a building to your own bespoke design allowing you to create the perfect space for your own personal needs. Please contact us prior to ordering to discuss your own requirements such as the layout of the building, as many layouts are possible.   Standard Options: A range of standard options are also available these include: 3" x 2" or 4" x 2" framing, toughened glass, bespoke heights, wider doors, bitumen shingled roofs, chunky corner splines, boxed barge boards, smaller security windows, skylights, stable doors, apex or round windows, tanalisation, hand painting, Sedum Green roofs or even partitions.   Please note: Unlike man Minimize

Pressure Treated Classic Wooden Garage 18'x9' Designed to f ... Read more

Pressure Treated Classic Wooden Garage 18'x9' Designed to fit within the tight constraints of a customer's garden, this Classic Wooden Garage 18'x9' (5.49m x 2.74m) has been manufactured using 22mm T&G cladding and pressure treated for longevity. This garage incorporates one set of double doors and a single access door, both of which were placed in the 9' width. The main features of this garage are: 22mm T&G cladding Pressure treated One set of double doors One single door Guttering on two sides (excluding water butt) Windowless All our sheds, workshops or garages are manufactured in our own workshops to the highest of standards in the old fashioned way. Each building is lovingly hand made by trained carpenters with selected, 5th grade redwood cladding on a substantial heavy duty frame. Every building is made specifically for a customer on order and is tailored to your own individual requirements. All our own manufactured buildings feature the following as standard: Framing: Heavy duty framing of 2"x2" (50 x 50mm) as standard with top and bottom rails of 2"x 1½" (50 x 38mm). The timber is of a high grade and planed smooth. Cladding: Clad in 12mm 5th Grade matching Tongue and Grooved, well seasoned Swedish red wood pine to ensure relatively knot free boards.  An option of Tanalisation is available.  The boards are secured to the framing by high quality galvanised nails. Roof: Manufactured from 12mm tongue and groove boards of the same quality as our cladding ,an exterior grade 11mm O.S. Board is also available at no extra cost should you require this. Our roofs are then covered with 20kg green roofing felt as standard however a higher quality, heavy duty felt is available as are bitumen felt tiles. Roofs can even be adapted to take heavier coverings such as clay pan tiles. Floors: Manufactured using 12mm tongue and groove boarding as standard. A 11mm O.S. Board of exterior quality is available if required as is either 19mm or 22mm boards for extra durability. The floor is supported on close centred 2"x1½" (50 x 38mm) planed floor joists. . Windows: All our windows are hand made in the old fashioned way using mortice and tenon joints and secured with high quality wood glue and star dowels. Each window has drip sills under the glass. The glass is beaded with mitred beading on a bed of silicone. Double glazing can also be supplied if required Doors: Standard doors are 5'10" high x 2'6" wide (1554 x 792mm) made from 12mm tongue and groove boards on a fully framed, ledged and braced structure and hung on three galvanized tee hinges. All doors are fitted with a mortise keyed lock and round handle as standard. Drip strips above for added weather protection If you are interested in a bespoke shed then please contact us to discuss your own requirements such as the layout of the building, as many permeations are possible. You may have additional requirements such as alternative cladding, security hinges, double doors, stable doors, heavy duty locks, security windows or skylights. Several other options are also available; strengthened floors, partitions, and even roll on - roll off roofs. We specialise mainly in bespoke buildings. If you would like to have a building built to your dimensions or specifications whether it be a small kennel or a 6 bedroom log cabin then please contact us to discuss your requirements. Please note: Unlike many of our other products this shed does attract an additional delivery charge if delivery is outside of the NR and IP postcodes. Please see the drop down list below for the delivery charge applicable to your area. Minimize

Log Cabin Garage 2 44mm 4.7x5.7m The Log Cabin Garage 2 mea ... Read more

Log Cabin Garage 2 44mm 4.7x5.7m The Log Cabin Garage 2 measuring 4.7 x 5.7m (15'4 x 18'7), incorporating the traditional log style. Constructed using high quality Nordic Pine in 44mm logs, well known for its durability and longevity. Providing a functional space, store you car here for protection from the elements, along with further household and garden items. Featuring side door for pedestrian access and side window, perfect for capturing natural light. Large centrally positioned double doors are included as standard, with an up and over garage door available as an upgrade. Black roofing felt is included as standard, an upgrade to black square shingles is also available. Standard Features: Logs with Chalet cut for wind and rain resistant corners 60x80mm pressure treated foundation joists 19mm tongue and grooved roof boards Roof slats, storm protection and assembly kit Side door in laminated timber with cylindrical lock and handle Garage door with cylindrical lock and handle 4mm Glazing Options: Black Shingles Up and Over Garage Door - 2220 x 1900mm Dimensions: Overall dimensions: 4.7 x 5.7m (15'4 x 18'7) Internal dimensions: 4.5 x 5.5m (14'8 x 18') Log thickness: 44mm Wall Height: 2.17m (7'1) Total Height: 2.79m (9'2) Area: 23.8m2 Single door: 740 x 1750mm (2'6 x 5'9) Double doors: 2250 x 1940mm (7'4 x 6'4) Window: 1190 x 890mm  (3'9 x 2'9) * This manufacturer may charge extra for remote delivery areas such as the highlands of Scotland and offshore islands. Please contact us for a delivery price if you think this applies to you. Minimize

Double Log Cabin Garage 44mm 5.95x5.30m With traditional lo ... Read more

Double Log Cabin Garage 44mm 5.95x5.30m With traditional log cabin construction in 44mm solid wall logs, the Double Log Cabin Garage measuring 5.95 x 5.3m (19'5 x 17'4). This double garage benefits from two sets of double doors and a large open interior, perfect for housing two vehicles. Not only suitable for storing vehicles, take advantage of this space for use as a workshop, hobby room or for general storage requirements. Featuring half glazed single door for pedestrian access and window, both positioned to the side. Black roofing felt is included as standard, an upgrade to black square shingles is also available. Standard Features: Logs with Chalet cut for wind and rain resistant corners 60x80mm pressure treated foundation joists 19mm tongue and grooved roof boards Roof slats, storm protection and assembly kit Side door in laminated timber with cylindrical lock and handle Garage door with cylindrical lock and handle 4mm Glazing Options: Black Shingles Up and Over Garage Door - 2220 x 1900mm Please contact us for pricing. Dimensions: Overall dimensions: 5.95 x 5.30m (19'5 x 17'4) Internal dimensions: 5.75 x 5.1m (18'9 x 16'7) Log thickness: 44mm Wall Height: 2.17m (7'1) Total Height: 3.02m (9'9) Area: 28.4m2 Single door: 740 x 1750mm (2'6 x 5'9) Double doors: 2250 x 1940mm (7'5 x 6'4) Window: 1190 x 890mm  (3'9 x 2'9) * This manufacturer may charge extra for remote delivery areas such as the highlands of Scotland and offshore islands. Please contact us for a delivery price if you think this applies to you. Minimize

X A bespoke wooden workshop garage to our customers require ... Read more

X A bespoke wooden workshop garage to our customers requirements. The cladding used on this shed was 12mm T&G. The workshop features Felt tiles, slightly narrower windows than usual for security reasons and a front overhang over the double garage doors The main features of this particular shed combination are: 12mm T&G cladding on a heavy duty frame 12mm T&G roof and floor 8' Double doors, fully framed ledge and braced Heavy duty galvanised hinges bolted through for security 4 banks of windows consisting of 1 opening and 2 fixed windows Felt tiled roof with boxed bargeboards Drip strip above the door and below the windows All our sheds, workshops or garages are manufactured in our own workshops to the highest of standards in the old fashioned way. Each building is lovingly hand made by trained carpenters with selected, 5th grade redwood cladding on a substantial heavy duty frame. Every building is made specifically for a customer on order and is tailored to your own individual requirements. All our own manufactured buildings feature the following as standard; Heavy duty framing of 2"x2" (50 x 50mm) as standard with top and bottom rails of 2"x1½" (50 x 38mm).the timber is of a high grade and planed smooth. Clad in 12mm 5th Grade Tongue and Grooved Shiplap, well seasoned Swedish red wood pine to ensure relatively knot free boards. An option of 22mm cladding is available if required as is Tanalising.  The boards are secured to the framing by high quality galvanised nails. Roofs are manufactured from 12mm tongue and groove boards of the same quality as our cladding ,an exterior grade 11mm O.S. Board is also available at no extra cost should you require this.  Our roofs are then covered with 20kg green roofing felt as standard however a higher quality, heavy duty felt is available as are also felt tiles. Roofs can even be adapted to take heavier coverings such as clay pan tiles. Windows: All our windows are hand made in the old fashioned way using mortise and tennon joints and secured with high quality wood glue and star dowels. Each window has drip sills under the glass. The glass is beaded with mitred beading on a bed of silicone. Double glazing can also be supplied if required Doors: Standard doors are 5'10" high x 2'6" wide (1554 x 792mm) made from 12mm tongue and groove boards on a fully framed, ledged and braced structure and hung on three galvanized tee hinges. All doors are fitted with a mortise keyed lock and round handle as standard. Drip strips above for added weather protection If you are interested in a bespoke shed then please contact us to discuss your own requirements such as the layout of the building, as many permeations are possible. You may have additional requirements such as alternative cladding, security hinges, double doors, stable doors, heavy duty locks, security windows or skylights. Several other options are also available; strengthened floors, partitions, and even roll on - roll off roofs. We specialise mainly in bespoke buildings. If you would like to have a building built to your dimensions or specifications whether it be a small kennel or a 6 bedroom log cabin then please contact us to discuss your requirements.  Please note: Unlike many of our other products this shed does attract an additional delivery charge if delivery is outside of the NR + IP postcodes. Please see the drop down list below for the delivery charge applicable to your area. Minimize

Log Cabin Garage Novel 3.8 x 5.7m 44mm The Log Cabin Garage ... Read more

Log Cabin Garage Novel 3.8 x 5.7m 44mm The Log Cabin Garage Novel measuring 3.8 x 5.7m (12'5 x 18'7). With traditional log cabin construction in 44mm solid wall logs and in contemporary style, perfect for accompanying any modern home. With a large area of 19m2, this garage offers ample storage space for your car and other garden items. Featuring side door for pedestrian access and two single windows, glazed with frosted glass for added security. Supplied with black roofing felt as standard. Constructed using high quality Nordic Pine, a slow growth rate of timber creates logs with longevity and durability. Standard Features: Logs with Chalet cut for wind and rain resistant corners 60x80mm pressure treated foundation joists 19mm tongue and grooved roof boards Roof slats, storm protection and assembly kit Side door in laminated timber with cylindrical lock and handle Garage door with cylindrical lock and handle Door Options: Up and over Garage door - 2220 x 1900mm The Novel features double wooden doors as standard. Please select your desired door style from the drop down menu below. Dimensions: Overall dimensions: 3.8 x 5.7m (12'5 x 18'7) Internal dimensions: 3.6 x 5.5m (11'8 x 18') Log thickness: 44mm Wall Height: 2.28m (7'5) Total Height: 2.43m (7'10) Area: 19m2 Single door: 740 x 1820mm Single window: 700 x 430mm Wooden door: 2250 x 1940mm * This manufacturer may charge extra for remote delivery areas such as the highlands of Scotland and offshore islands. Please contact us for a delivery price if you think this applies to you. Minimize

*SPECIAL OFFER PRICE* We are pleased to offer this log cabi ... Read more

*SPECIAL OFFER PRICE* We are pleased to offer this log cabin with a further 10% discount off our usual RRP until 1st February 2012. Discounted price displayed and offer not valid on optional extras. Installation is also available with a 10% discount. To take advantage of the special offer please call our sales team on 0845 00 66 286 for prices before 24th February. The extra large wooden garage measuring 4.7x5.7m (15'5"x18'8"). This high quality 58mm extra large log garage is a very attractive large storage area, perfect for garden and household items, a car, caravan or even a boat. The garage has large double doors to the front as well as a glazed personal door. For added internal light there is a glazed casement windows. The garage includes standard foundation beams, however it is possible to order drainage foundation beams as an optional extra. The wooden garage is available in untreated slow grown Norwegian pine. Numerous options are available to enhance the wooden garage such as full tanalisation of the building including doors, windows and logs to increase the expected life span of the building. In addition Tuin also offer a Finishing Service provided by the application of a  "base coat" and "base coat & top" painting solution in a variety of opaque colours and stains. Manufactured by TuinDeco, Europe's largest suppliers of garden building and products. Built and specified to conform to Dutch high standards which vary greatly to the specification acceptable by UK manufacturers/suppliers; there is no mixture of timber species in the cabin - inferior products allow spruce/pine mix which cuts down on manufacturing costs but gives colour and expansion variations which is not pleasing to the eye or, long term, good for the life of the cabin. Finger jointing is not permitted in the Dutch market and this building is free of this economy feature. Many UK suppliers allow up to 40% finger jointing. Finger jointing is a process where varying lengths of wood are joined together creating a full log and enables the factory to make use of odd lengths. The process creates a strong and full log but is unsightly, the Dutch market find this unacceptable. All top logs are chamfered to meet the roof and to keep consistency of wall thickness for insulation purposes. Interlocking joints are bevelled slightly aiding installation and creating and wind and water tight connection. No OSB or similar is used in the roof, the Dutch market favour smooth planed 18mm tongue and groove boards. TuinDeco supply only the highest quality product at an extremely competitive price with a full option service to enhance the building to your aspirations including Tanalisation, Painting and Installation. Also available is a bespoke service for log cabins from 28mm - 92mm thick wall logs in any number of variations. This building features the following as standard: 58mm thick wall logs, conical double tongue and groove for stability - untreated - optional Tanalisation or Painting Overall dimensions: 4.7m x 5.7m Footprint: 4.5m x 5.5m Ridge height: 2.75m Door height: 188.5m Door width: 2 x 1.14m Rear overhang: 0.20m Front overhang: 0.30m Roof area: Approx 42m.sq Inclusive of Standard roofing felt - Felt Shingles in five colours as an option European standard door locks Slow grown Nordic pine producing a relatively knot free timber and tight annular rings ensuring a dense timber. 18mm T&G roof boards Tanalised foundation beams as standard to ensure untreated wood doesn't make contact with the ground Fixings, Plans and Comprehensive instructions Several options exist to customise and enhance the wooden log garage including: Felt roof shingles - Square - as pictured  - 5 colours available EPDM roofing foil Metal Roof Tiles - 3 colours available Tanalised drainage beams - profiled shape to channel any water away from the base of the log cabin. Hardwood drainage beams - profiled shape to channel any water away from the base of the log cabin. Gut Minimize

A tailor made heavy duty wooden garage workshop for our cus ... Read more

A tailor made heavy duty wooden garage workshop for our customer. Made from 22mm cladding on our standard heavy duty framing. This building measures 10.05m x 3.84m (33' x 12'6") and was designed with a lip all round except the front apron portion. Internally the building was fully insulated and lined with 12mm boards. The roof was also insulated so our customer can pursue his hobby in a warm and comfortable wooden garage workshop. The main features of this particular shed combination are: 22mm T&G cladding on a heavy duty frame 12mm insulated T&G roof 8' Double doors, fully framed ledge and braced Heavy duty galvanised hinges bolted through for security Stable door, again ledged and braced with a traditional round door handle 8 Opening windows Felt tiled roof with boxed bargeboards and battens Drip strip above the door and below the windows Insulated roof and fully lined internally Painted in the customers choice of colour - 2 coats All our sheds, workshops or garages are manufactured in our own workshops to the highest of standards in the old fashioned way. Each building is lovingly hand made by trained carpenters with selected, 5th grade redwood cladding on a substantial heavy duty frame.  Every building is made specifically for a customer on order and is tailored to your own individual requirements. All our own manufactured buildings feature the following as standard; Heavy duty framing of 2"x2" (50 x 50mm) as standard with top and bottom rails of 2"x1½" (50 x 38mm).the timber is of a high grade and planed smooth. Clad in 12mm 5th Grade Tongue and Grooved Shiplap, well seasoned Swedish red wood pine to ensure relatively knot free boards.  An option of 22mm cladding is available if required as is Tanalising.  The boards are secured to the framing by high quality galvanised nails. Roofs are manufactured from 12mm tongue and groove boards of the same quality as our cladding ,an exterior grade 11mm O.S. Board is also available at no extra cost should you require this.  Our roofs are then covered with 20kg green roofing felt as standard however a higher quality, heavy duty felt is available as are also felt tiles. Roofs can even be adapted to take heavier coverings such as clay pan tiles. Windows: All our windows are hand made in the old fashioned way using mortise and tennon joints and secured with high quality wood glue and star dowels. Each window has drip sills under the glass. The glass is beaded with mitred beading on a bed of silicone. Double glazing can also be supplied if required Doors: Standard doors are 5'10" high x 2'6" wide (1554 x 792mm) made from 12mm tongue and groove boards on a fully framed, ledged and braced structure and hung on three galvanized tee hinges. All doors are fitted with a mortise keyed lock and round handle as standard. Drip strips above for added weather protection If you are interested in a bespoke shed then please contact us to discuss your own requirements such as the layout of the building, as many permeations are possible.  You may have additional requirements such as alternative cladding, security hinges, double doors, stable doors, heavy duty locks, security windows or skylights.  Several other options are also available; strengthened floors, partitions, and even roll on - roll off roofs. We specialise mainly in bespoke buildings. If you would like to have a building built to your dimensions or specifications whether it be a small kennel or a 6 bedroom log cabin then please contact us to discuss your requirements.  Please note: Unlike many of our other products this shed does attract an additional charge if delivery is outside of the NR and IP postcodes. Please see the drop down list below for the delivery charge applicable to your area. Minimize

*SPECIAL OFFER PRICE* We are pleased to extend our 10% off ... Read more

*SPECIAL OFFER PRICE* We are pleased to extend our 10% off Special Offer until 15th February 2012 - buy now and save a further 10% off our usual RRP.  Discounted price displayed and offer not valid on optional extras. Installation is also available with a 10% discount. To take advantage of the special offer please call our sales team on 0845 00 66 286 for prices before 24th February.  The Flat Roof Log Garage measuring 3.8x5.36m (12'5x17'6). With traditional log cabin construction in 45mm solid wall logs and in contemporary style with flat roof, this garage is perfect for accompanying any modern home. With ample storage space for one vehicle as well as other garden and household items. Featuring single side door for pedestrian access and two bottom hung sash windows, glazed with frosted glass for added privacy. This garage is available in untreated slow grown Norwegian pine. Numerous options are available to enhance the garage such as full tanalisation of the building including doors, windows and logs to increase the expected life span of the building. In addition Tuin also offer a Finishing Service provided by the application of a "base coat & top" painting solution in a variety of opaque colours and stains. Manufactured by TuinDeco, Europe's largest suppliers of garden building and products. Built and specified to conform to Dutch high standards which vary greatly to the specification acceptable by UK manufacturers/suppliers; there is no mixture of timber species in the cabin - inferior products allow spruce/pine mix which cuts down on manufacturing costs but gives colour and expansion variations which is not pleasing to the eye or, long term, good for the life of the cabin. Finger jointing is not permitted in the Dutch market and this building is free of this economy feature. Many UK suppliers allow up to 40% finger jointing. Finger jointing is a process where varying lengths of wood are joined together creating a full log and enables the factory to make use of odd lengths. The process creates a strong and full log but is unsightly, the Dutch market find this unacceptable. All top logs are chamfered to meet the roof and to keep consistency of wall thickness for insulation purposes. Interlocking joints are bevelled slightly aiding installation and creating and wind and water tight connection. No OSB or similar is used in the roof, the Dutch market favour smooth planed 18mm tongue and groove boards. TuinDeco supply only the highest quality product at an extremely competitive price with a full option service to enhance the building to your aspirations including Tanalisation, Painting and Installation. Also available is a bespoke service for log cabins from 28mm - 92mm thick wall logs in any number of variations. This building features the following as standard: 45mm thick wall logs, conical double tongue and groove for stability - untreated - optional Tanalisation or Painting Overall dimensions: 3.8m x 5.36m Footprint: 3.6m x 5.16m Wall height: 2.22m Door height (including frame): 1.93m Door width: 2 x 1.10m Overhang: 0.25m Roof area: Approx 27m.sq Inclusive of Standard roofing felt - Felt Shingles in five colours as an option European standard door locks Stainless steel door step Slow grown Nordic pine producing a relatively knot free timber and tight annular rings ensuring a dense timber. 18mm T&G roof boards Tanalised foundation beams as standard to ensure untreated wood doesn't make contact with the ground Fixings, Plans and Comprehensive instructions Several options exist to customise and enhance the wooden log garage including: Felt roof shingles - Square - as pictured  - 5 colours available EPDM roofing foil Metal Roof Tiles - 3 colours available Tanalised drainage beams - profiled shape to channel any water away from the base of the log cabin. Hardwood drainage beams - profiled shape to channel any water away from the base of the log cabin. Guttering set - including fixings and down pipes Add Minimize

*SPECIAL OFFER PRICE* We are pleased to offer this log cabi ... Read more

*SPECIAL OFFER PRICE* We are pleased to offer this log cabin with a further 10% discount off our usual RRP until 1st February 2012. Discounted price displayed and offer not valid on optional extras. Installation is also available with a 10% discount. To take advantage of the special offer please call our sales team on 0845 00 66 286 for prices before 24th February. The 70mm Field Barn Log Garage measuring 6x6m (19'7"x19'7"). A design influenced by the traditional field barn, this garage provides a large internal space for storage of your car and other garden essentials. Incorporating the Log Cabin style using 70mm solid wall logs, this garage will comfortably house two vehicles. The Log Garage is available in untreated slow grown Norwegian pine. Numerous options are available to enhance the Garage such as full tanalisation of the building including doors, windows and logs to increase the expected life span of the building. In addition Tuin also offer a Finishing Service provided by the application of a  "base coat" and "base coat & top" painting solution in a variety of opaque colours and stains. Manufactured by TuinDeco, Europe's largest suppliers of garden building and products. Built and specified to conform to Dutch high standards which vary greatly to the specification acceptable by UK manufacturers/suppliers; there is no mixture of timber species in the cabin - inferior products allow spruce/pine mix which cuts down on manufacturing costs but gives colour and expansion variations which is not pleasing to the eye or, long term, good for the life of the cabin. Finger jointing is not permitted in the Dutch market and this building is free of this economy feature. Many UK suppliers allow up to 40% finger jointing. Finger jointing is a process where varying lengths of wood are joined together creating a full log and enables the factory to make use of odd lengths. The process creates a strong and full log but is unsightly, the Dutch market find this unacceptable. All top logs are chamfered to meet the roof and to keep consistency of wall thickness for insulation purposes. Interlocking joints are bevelled slightly aiding installation and creating and wind and water tight connection. No OSB or similar is used in the roof, the Dutch market favour smooth planed 18mm tongue and groove boards. TuinDeco supply only the highest quality product at an extremely competitive price with a full option service to enhance the building to your aspirations including Tanalisation, Painting and Installation. Also available is a bespoke service for log cabins from 28mm - 92mm thick wall logs in any number of variations. This building features the following as standard: 70mm thick wall logs, conical double tongue and groove for stability - untreated - optional Tanalisation or Painting Overall dimensions: 6m x 6m Footprint: 5.8m x 5.8m Ridge height: 3.7m Overhang: 0.20m Roof area: Approx 49m.sq Inclusive of Standard roofing felt - Felt Shingles in five colours as an option European standard door locks Stainless steel doorstep Slow grown Nordic pine producing a relatively knot free timber and tight annular rings ensuring a dense timber. 18mm T&G roof boards Tanalised foundation beams as standard to ensure untreated wood doesn't make contact with the ground Fixings, Plans and Comprehensive instructions Several options exist to customise and enhance the Field Barn Log Garage including: Felt roof shingles - Square - as pictured  - 5 colours available EPDM roofing foil Metal Roof Tiles - 3 colours available Tanalised drainage beams - profiled shape to channel any water away from the base of the log cabin. Hardwood drainage beams - profiled shape to channel any water away from the base of the log cabin. Additional Wall logs for extra height, doors and windows (fitted and notched by customer or fitting team) - Contact us for prices Beaver tail felt shingles - 3 colours available - Contact us for prices Log Store - a canopy which Minimize

The Miami Garage and Garden Room Cabin from Lugarde measure ... Read more

The Miami Garage and Garden Room Cabin from Lugarde measures an 7.5m by 8.0m (24'6x26'2). The interior comprises of a deep 4.0x8.0m Garage and a generous 3.5x4.0m Garden room. This dual purpose log cabin combines storage, leisure and outdoor living in the same unit because of it's internal wall and spacious integral canopy 3.5x4.0m. The Miami Log Cabin comes in 44mm logs as standard however 68mm walls are also available as well as floor and roof insulation. This impressive building is an example from Lugardes standard range however every cabin is produced to order and can therefore be tailored to your own specific requirements. Miami Garage Log Cabin Standard Features: One Electric Garage Doors GD03 Three Fixed Single Glazed Windows PJ07 Two Bi-Folding Doors DL01H and VL02H with safety glass One interior Solid Panel Door DD03 An Internal Wall 45mm Thick wall Logs 19mm T&G Roof Boards Bitumen Shingled Roof (pictured tiles are not standard)  Lugarde's Optional Extras and Upgrades: A choice of 44mm or 68mm Thick wall logs Optional Floor For Garden Room Shingle Colour; Black, Brown, Red, Blue or Green Brass or Chrome metal work Roof and Floor Insulation Kits Factory Treatment Transparent Colour Stain of the Log Cabin and Floor Lugarde's Quality and Detail: Lugarde are a trusted manufacturer who hold 30 years experience producing and distributing Log Cabins in Europe and the UK. Their understanding of garden buildings has formed a refined product and outstanding service. Please see our support information page or download a brochure for more details but the following lists a few key points: Lugarde are dedicated to choosing high-quality raw materials. They select Premium Northern European Pine from ecologically managed forests as the foundation for all there Log Cabins and accessories. The timbers are kiln dried to ensure a moisture content of approximately 12 to 14% which  reduces the natural movement, resulting in less cracks and warping. Both 44mm and the 68mm logs have the advantage of wind and rain resistant chalet milling corners with the 68mm thickness benefiting from a double tongue and groove profile. Windows and doors are fitted with solid hinges and locks. Doors are made from laminated wood strengthening the timbers against warping and are also fitted with aluminium threshold cover. On Double Glazed windows and doors full rubber seals exclude draughts whilst the windows come with adjustable hinges. Delivery takes place on Lugarde's own fleet of Artic lorries. Approximate delivery weeks are given shortly after ordering with a delivery day and time (am or pm) is confirmed by phone and email the week before. Lugarde's experienced drivers off-load the palletised buildings and will deliver roadside at your property. 5 Year warranty on manufacturing and construction faults. Miami Garage and Garden Room Dimensions: Width 7.5m (24'6) Depth 8.0m (26'2) Eaves Height 2.65m (8'6) Ridge Height 4.0m (13'1) Roof Overhang all round 30cm (11.8 inches) Garage Door Opening 2.29 x 2.00m (7'5 x 6'5) Of course as Lugarde's cabins are made to order and can be fully customized to suit your specific requirements. Other options such as; Internal Walls, Mezzanine floors and Attic spaces, Wooden Step Ladders for mezzanine access, Canopies, Verandas and Decking can all be added to personalize your Lugarde log cabin. Delivery Note: Delivery is FREE to most locations in the UK however there are additional charges for address further North than Leeds. Please contact us for prices before ordering. Please note deliveries of these log cabins are on an articulated lorry which can be 40 foot long. Delivery is to kerb-side which means either to your front drive or front grass. The pallets will be off loaded and left in this location. Please advise us before placing your order if you foresee any access restrictions for this type of vehicle as there may be additional costs involved. Minimize

Log Cabin Garage 3 44mm 3.8 x 5.7m The Log Cabin Garage 3 m ... Read more

Log Cabin Garage 3 44mm 3.8 x 5.7m The Log Cabin Garage 3 measuring 3.8 x 5.7m (12'5 x 18'7). With traditional log cabin construction in 44mm solid wall logs, this garage is perfect for storing your car and garden accessories. A large internal space of 18.9m2 provides ample space for your car whilst allowing use for storage or perhaps as a home workshop. Featuring side door for pedestrian access and side window, perfect for capturing natural light. Large centrally positioned double doors are included as standard, with an up and over garage door available as an upgrade. Constructed using high quality Nordic Pine, well known its durability and longevity. Black roofing felt is included as standard, an upgrade to black square shingles is also available. Standard Features: Logs with Chalet cut for wind and rain resistant corners 60x80mm pressure treated foundation joists 19mm tongue and grooved roof boards Roof slats, storm protection and assembly kit Side door in laminated timber with cylindrical lock and handle Garage door with cylindrical lock and handle 4mm Glass Options: Black Shingles Up and Over Garage Door - 2220 x 1900mm Dimensions: Overall dimensions: 3.8 x 5.7m (12'5 x 18'7) Internal dimensions: 3.6 x 5.5m (11'8 x 18') Log thickness: 44mm Wall Height: 2.17m (7'1) Total Height: 2.68m (8'8) Area: 18.9m2 Single door: 740 x 1750mm (2'6 x 5'9) Double doors: 2250 x 1940mm (7'5 x 6'4) Window: 1190 x 890mm  (3'9 x 2'9) * This manufacturer may charge extra for remote delivery areas such as the highlands of Scotland and offshore islands. Please contact us for a delivery price if you think this applies to you. Minimize

A pressure treated wooden garage workshop built to our cust ... Read more

A pressure treated wooden garage workshop built to our customers requirements. This building measures 2.7x4.14m (9'x13'6) and is manufactured from 22mm tanalised cladding to give years of sue without the need to ever paint or treat it.  The main features of this particular shed combination are: 22mm T&G cladding on a heavy duty frame 12mm T&G roof 1 set of 8' Double doors, fully framed ledge and braced Heavy duty galvanised hinges bolted through for security 1 bank of windows consisting of 2 opening windows Heavy duty felt tiles Single personal door, framed, ledged and braced Drip strip above the door and below the windows All our sheds, workshops or garages are manufactured in our own workshops to the highest of standards in the old fashioned way. Each building is lovingly hand made by trained carpenters with selected, 5th grade redwood cladding on a substantial heavy duty frame.  Every building is made specifically for a customer on order and is tailored to your own individual requirements. All our own manufactured buildings feature the following as standard; Heavy duty framing of 2"x2" (50 x 50mm) as standard with top and bottom rails of 2"x1½" (50 x 38mm).the timber is of a high grade and planed smooth. Clad in 12mm 5th Grade Tongue and Grooved Shiplap, well seasoned Swedish red wood pine to ensure relatively knot free boards. An option of 22mm cladding is available if required as is Tanalising. The boards are secured to the framing by high quality galvanised nails. Roofs are manufactured from 12mm tongue and groove boards of the same quality as our cladding ,an exterior grade 11mm O.S. Board is also available at no extra cost should you require this.  Our roofs are then covered with 20kg green roofing felt as standard however a higher quality, heavy duty felt is available as are also felt tiles. Roofs can even be adapted to take heavier coverings such as clay pan tiles. Windows: All our windows are hand made in the old fashioned way using mortise and tennon joints and secured with high quality wood glue and star dowels. Each window has drip sills under the glass. The glass is beaded with mitred beading on a bed of silicone. Double glazing can also be supplied if required Doors: Standard doors are 5'10" high x 2'6" wide (1554 x 792mm) made from 12mm tongue and groove boards on a fully framed, ledged and braced structure and hung on three galvanized tee hinges. All doors are fitted with a mortise keyed lock and round handle as standard. Drip strips above for added weather protection If you are interested in a bespoke shed then please contact us to discuss your own requirements such as the layout of the building, as many permeations are possible. You may have additional requirements such as alternative cladding, security hinges, double doors, stable doors, heavy duty locks, security windows or skylights. Several other options are also available; strengthened floors, partitions, and even roll on - roll off roofs. We specialise mainly in bespoke buildings. If you would like to have a building built to your dimensions or specifications whether it be a small kennel or a 6 bedroom log cabin then please contact us to discuss your requirements.  Please note: Unlike many of our other products this shed does attract an additional delivery charge if delivery is outside of the NR and IP postcodes. Please see the drop down list below for the delivery charge applicable to your area. Minimize

garage door rubber floor seal adhesive heavy duty all sizes ... Read more

garage door rubber floor seal adhesive heavy duty all sizes brand new black rubber garage door floor seal please select the appropriate size for your garage for example a 7 ft garage door you would select a 7 ft 6 as this includes a 3 overlap to fit behind the frame both sides can also be easily trimmed is perfect for uneven garage floors this flexible yet extremely tough seal will rid your garage of unwanted rainwater and leaves with 2 differently shaped tapered sides this allows you to fit the Minimize

Stormguard Premium Garage Door Rubber Seal - Aluminium Impr ... Read more

Stormguard Premium Garage Door Rubber Seal - Aluminium Improving energy efficiency in your home can help to cut your fuel bills and help reduce carbon emissions., Ideal for hinged or up and over doors, Seals gaps up to 45mm under the door, Strong rubber seal, Saves energy & saves money, Draughts indicate that heat is escaping from your home., Keep your bills under control - and enjoy a more comfortable home. Collect at Store. FREE Home Delivery for all orders over 250. Minimize

*SPECIAL OFFER PRICE* We are pleased to offer this log cabi ... Read more

*SPECIAL OFFER PRICE* We are pleased to offer this log cabin with a further 10% discount off our usual RRP until 1st February 2012. Discounted price displayed and offer not valid on optional extras. Installation is also available with a 10% discount. To take advantage of the special offer please call our sales team on 0845 00 66 286 for prices before 24th February. The 70mm Log Garage and Carport measuring 7.63x8.30m (25'x27'2"). This Garage and Carport combination has been made in the the traditional Log Cabin Style using 70mm solid wall logs. The roof extends to the side of the garage, creating a handy carport area to shelter your car and other garden essentials. With wide double doors and single side door for access to the garage and two tilt and turn windows. The Garage and Carport is available in untreated slow grown Norwegian pine. Numerous options are available to enhance the Garage and Carport such as full tanalisation of the building including doors, windows and logs to increase the expected life span of the building. In addition Tuin also offer a Finishing Service provided by the application of a  "base coat" and "base coat & top" painting solution in a variety of opaque colours and stains. Manufactured by TuinDeco, Europe's largest suppliers of garden building and products. Built and specified to conform to Dutch high standards which vary greatly to the specification acceptable by UK manufacturers/suppliers; there is no mixture of timber species in the cabin - inferior products allow spruce/pine mix which cuts down on manufacturing costs but gives colour and expansion variations which is not pleasing to the eye or, long term, good for the life of the cabin. Finger jointing is not permitted in the Dutch market and this building is free of this economy feature. Many UK suppliers allow up to 40% finger jointing. Finger jointing is a process where varying lengths of wood are joined together creating a full log and enables the factory to make use of odd lengths. The process creates a strong and full log but is unsightly, the Dutch market find this unacceptable. All top logs are chamfered to meet the roof and to keep consistency of wall thickness for insulation purposes. Interlocking joints are bevelled slightly aiding installation and creating and wind and water tight connection. No OSB or similar is used in the roof, the Dutch market favour smooth planed 18mm tongue and groove boards. TuinDeco supply only the highest quality product at an extremely competitive price with a full option service to enhance the building to your aspirations including Tanalisation, Painting and Installation. Also available is a bespoke service for log cabins from 28mm - 92mm thick wall logs in any number of variations. This building features the following as standard: 70mm thick wall logs, conical double tongue and groove for stability - untreated - optional Tanalisation or Painting Overall dimensions: 7.63m x 8.3m Footprint: 3.79m x 8.1m Ridge height: 3.3m Single door height (including frame): 1.93m Garage door height: 2.12m Door width: 2x 110cm Overhang: 0.20m Roof area: Approx 74m.sq Inclusive of Standard roofing felt - Felt Shingles in five colours as an option Double garage doors Single access door Two tilt/turn windows European standard door locks Stainless steel doorstep Slow grown Nordic pine producing a relatively knot free timber and tight annular rings ensuring a dense timber. 18mm T&G roof boards Tanalised foundation beams as standard to ensure untreated wood doesn't make contact with the ground Fixings, Plans and Comprehensive instructions Several options exist to customise and enhance the Garage and Carport including: Felt roof shingles - Square - as pictured  - 5 colours available EPDM roofing foil Metal Roof Tiles - 3 colours available Tanalised drainage beams - profiled shape to channel any water away from the base of the log cabin. Hardwood drainage beams - profiled shape to channel any water away f Minimize

A made to measure bespoke Garage / Workshop measuring 3.04m ... Read more

A made to measure bespoke Garage / Workshop measuring 3.04m x 4.57m (10'x15'). This building is manufactured from 22mm cladding on our standard heavy duty framing. We build our garages, where possible to fit exactly to the concrete base so there is a lip running all around the building effectively sealing out any ingress of the weather.  The main features of this particular shed combination are: 22mm T&G cladding on a heavy duty frame 12mm T&G roof 8' Double doors, fully framed ledge and braced Heavy duty galvanised hinges bolted through for security Extra single door, again ledged and braced with a traditional round door handle 5 Opening windows Felt tiled roof with boxed bargeboards Drip strip above the door and below the windows All our sheds, workshops or garages are manufactured in our own workshops to the highest of standards in the old fashioned way. Each building is lovingly hand made by trained carpenters with selected, 5th grade redwood cladding on a substantial heavy duty frame. Every building is made specifically for a customer on order and is tailored to your own individual requirements. All our own manufactured buildings feature the following as standard; Heavy duty framing of 2"x2" (50 x 50mm) as standard with top and bottom rails of 2"x1½" (50 x 38mm).the timber is of a high grade and planed smooth. Clad in 12mm 5th Grade Tongue and Grooved Shiplap, well seasoned Swedish red wood pine to ensure relatively knot free boards.  An option of 22mm cladding is available if required as is Tanalising. The boards are secured to the framing by high quality galvanised nails. Roofs are manufactured from 12mm tongue and groove boards of the same quality as our cladding ,an exterior grade 11mm O.S. Board is also available at no extra cost should you require this. Our roofs are then covered with 20kg green roofing felt as standard however a higher quality, heavy duty felt is available as are also felt tiles. Roofs can even be adapted to take heavier coverings such as clay pan tiles. Windows: All our windows are hand made in the old fashioned way using mortise and tennon joints and secured with high quality wood glue and star dowels. Each window has drip sills under the glass. The glass is beaded with mitred beading on a bed of silicone. Double glazing can also be supplied if required. Doors: Standard doors are 5'10" high x 2'6" wide (1554 x 792mm) made from 12mm tongue and groove boards on a fully framed, ledged and braced structure and hung on three galvanized tee hinges. All doors are fitted with a mortise keyed lock and round handle as standard. Drip strips above for added weather protection If you are interested in a bespoke shed then please contact us to discuss your own requirements such as the layout of the building, as many permeations are possible. You may have additional requirements such as alternative cladding, security hinges, double doors, stable doors, heavy duty locks, security windows or skylights. Several other options are also available; strengthened floors, partitions, and even roll on - roll off roofs. We specialise mainly in bespoke buildings. If you would like to have a building built to your dimensions or specifications whether it be a small kennel or a 6 bedroom log cabin then please contact us to discuss your requirements.  Please note: Unlike many of our other products this shed does attract an additional delivery charge if delivery is outside of the NR and IP postcodes. Please see the drop down list below for the delivery charge applicable to your area. Minimize

A project for a private school, the area was being re-lands ... Read more

A project for a private school, the area was being re-landscaped to provide an out door teaching area.  The building we produced is 4.5m in diameter and will be used for the younger children.  Manufactured from 22mm tanalised cladding on a heavy duty framing.  A double skin roof with heavy duty felt beneath shiplap slats for a rustic appearance. The main features of this building are: 22mm T&G cladding on a heavy duty frame Pressure Treated timber throuout Framed window openings Benches all around the inside area Double skin roof Octagonal design All our sheds, workshops or garages are manufactured in our own workshops to the highest of standards in the old fashioned way. Each building is lovingly hand made by trained carpenters with selected, 5th grade redwood cladding on a substantial heavy duty frame.  Every building is made specifically for a customer on order and is tailored to your own individual requirements. All our own manufactured buildings feature the following as standard; Heavy duty framing of 2"x2" (50 x 50mm) as standard with top and bottom rails of 2"x1½" (50 x 38mm).the timber is of a high grade and planed smooth. Clad in 12mm 5th Grade Tongue and Grooved Shiplap, well seasoned Swedish red wood pine to ensure relatively knot free boards.  An option of 22mm cladding is available if required as is Tanalising.  The boards are secured to the framing by high quality galvanised nails. Roofs are manufactured from 12mm tongue and groove boards of the same quality as our cladding ,an exterior grade 11mm O.S. Board is also available at no extra cost should you require this.  Our roofs are then covered with 20kg green roofing felt as standard however a higher quality, heavy duty felt is available as are also felt tiles. Roofs can even be adapted to take heavier coverings such as clay pan tiles. Floors: Are of 12mm tongue and groove boarding as standard.  A 11mm O.S. Board of exterior quality is available if required as is either 19mm or 22mm boards for extra durability.  The floor is supported on close centred 2"x1½" (50 x 38mm) planed floor joists. . Windows: All our windows are hand made in the old fashioned way using mortice and tennon joints and secured with high quality wood glue and star dowells. Each window has drip sills under the glass. The glass is beaded with mitred beading on a bed of silicone. Double glazing can also be supplied if required Doors: Standard doors are 5'10" high x 2'6" wide (1554 x 792mm) made from 12mm tongue and groove boards on a fully framed, ledged and braced structure and hung on three galvanized tee hinges. All doors are fitted with a mortise keyed lock and round handle as standard. Drip strips above for added weather protection If you are interested in a bespoke shed then please contact us to discuss your own requirements such as the layout of the building, as many permeations are possible.  You may have additional requirements such as alternative cladding, security hinges, double doors, stable doors, heavy duty locks, security windows or skylights.  Several other options are also available; strengthened floors, partitions, and even roll on - roll off roofs. We specialise mainly in bespoke buildings. If you would like to have a building built to your dimensions or specifications whether it be a small kennel or a 6 bedroom log cabin then please contact us to discuss your requirements.  Please note: Unlike many of our other products this shed does attract an additional charge if delivery is outside of the NR and IP postcodes. Please see the drop down list below for the delivery charge applicable to your area. Minimize

gliderol mini roller garage door to suit an opening upto 7 ... Read more

gliderol mini roller garage door to suit an opening upto 7 ft high this door is brand new direct from manufacturer comes with all tracks brackets and fixings the door is manual operation but i can supply a full auto remote system if needed nationwide delivery can be arranged or buyer can collect contact me anytime on 07850 368501 for more details office number 01257 470888 9 am 5 pm supplying installing gliderol doors since 1989 we will beat any like for like price gliderol mini roll is similar Minimize

Protek Wood Protector Colours - multi purpose garden paint, ... Read more

Protek Wood Protector Colours - multi purpose garden paint, ideal for protecting your shed, summerhouse, log cabin, garage - in fact any timber garden building and even masonry and terracotta! This wood protector is a five year protective coating which limits discolouration and decay from water, fungi and algae.  The superior formulation of this product allows it to be applied to a variety of surfaces as it will adhere to any material that is porous eg terracotta pots, masonry etc. This product was awarded Best Buy in "Gardens Made Easy."  There are 16 fabulous rich colour choices. Available in 1 litre and 5 litres tubs.  Due to the cost of delivery we offer the 5 litre size and multiples thereof as standard as this is the most economical for the customer, however if you do require the 1 litre size we can quote for this, please contact us. Features: Protective coating, lasts up to 5 years Easy to apply and low odour Can be applied by brush, spray or roller Pet and plant friendly Multi purpose - will adhere to any material that is porous such as terracotta or masonry Water repellent Fungal and algal protection Easy water clean up Light fast, quick drying 16 rich colour choices   Advice: Coverage per 5 litresis approximately 40m2, this applies to the first coat only and can vary according to the surface.  A second coat will require a lesser amount.  2 coats are recommended, if applying Wood Protector to an object that will be subject to constant use (eg, garden furniture) or from foot traffic (eg decking) then it is recommended that you apply Protek Clear Tough Coat as a final top coat.  This will protect the colour underneath from wear and tear.  We also are able to supply the Protek Clear Tough Coat, please see the Related Products section (below the main product image on this page) for a link to the correct product page. IMPORTANT DELIVERY INFORMATION: this item is delivered by a parcel carrier who cannot leave goods without a signature unless special instructions are given at the time of order eg. if no-one in, please leave with neighbour, please leave by back door, please leave in garden shed etc.  The carrier will not be able to specify a particular date or time for delivery so it is always wise to give alternative instructions if no-one is in to sign for the delivery.  Please use the Customer Notes section of our online ordering process to give us this vital information or a re-delivery cost may be incurred for any second delivery attempt. Minimize

1 x D600 operator 1 x ST1C19 chain drive 2000mm 1 x plug-in ... Read more

1 x D600 operator 1 x ST1C19 chain drive 2000mm 1 x plug-in 868MHz receiver 1 x 2 button 868MHz transmitter Easy to install kits for the builder and electrician Garage Door Automation D600 operator 1 110600 ST1C19 chain drive 2000mm 1 390119 XF 868 rece Minimize