> Building Supplies > brand stanley

Bostitch 3.1 x 90mm PaperTape 33° Nails & Fuel Smooth Shan ... Read more

Bostitch 3.1 x 90mm PaperTape 33° Nails & Fuel Smooth Shank Galvanised (2200) BOS3190G12FC PT PaperTape Series Smooth Shank Clipped Head 33° Nails & Fuel.Profile: SmoothSmooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lowest of the group. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them.Finish: PlainPlain finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. Finish: GalvanisedGalvanised Nails. Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc.Paper Tape Collated Stick Nails, this type of collation is ideal in construction environments where work can be kept free of collation debris. Paper tape nails traditionally have a clipped head to allow the shanks of the nails to touch each other when they are collated. In this way it is possible to fit more nails on a stick.Gauge/Diameter (mm) 3.1 Length 90 Clipped Head 33°SKU PT3190G12FC Profile SMOOTH Finish GALV Description Galvanised Smooth Shank 3.1 x 90mm NailsFuel Cell Qty per box 2200 Will also fit GF33PT-E, GF33PT-U BOS3190G12FC Minimize

Bostitch 3.1 x 90mm PaperTape 33° Nails & Fuel Smooth Sh ... Read more

Bostitch 3.1 x 90mm PaperTape 33° Nails & Fuel Smooth Shank Plain (2200) BOS3190FC PT PaperTape Series Smooth Shank Clipped Head 33° Nails & Fuel.Profile: SmoothSmooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lowest of the group. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them.Finish: PlainPlain finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. Finish: GalvanisedGalvanised Nails. Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc.Paper Tape Collated Stick Nails, this type of collation is ideal in construction environments where work can be kept free of collation debris. Paper tape nails traditionally have a clipped head to allow the shanks of the nails to touch each other when they are collated. In this way it is possible to fit more nails on a stick.Gauge/Diameter (mm) 3.1 Length 90 Clipped Head 33°SKU PT3190FC Profile SMOOTH Finish PLAIN Description Plain Smooth Shank 3.1 x 90mm Nails Fuel Cell Qty per box 2200 Will also fit GF33PT-E, GF33PT-U BOS3190FC Minimize

Bostitch RH25R50G50 2.5mm Ring Nail x 50mm Galvanised Pack ... Read more

Bostitch RH25R50G50 2.5mm Ring Nail x 50mm Galvanised Pack of 2000 BOSRH25R5050Packs of 2000 Round head nails.These plastic collated stick nails traditionally have a full round head, while only giving marginally better holding power to clipped head nails, they are preferred by the construction industry. Collation is angled at 21° to accommodate the overlapping heads.Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them.Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater.Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish.Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicke Minimize

Bostitch 32mm 18 Gauge Galvanised Brad Nails & Fuel (2000) ... Read more

Bostitch 32mm 18 Gauge Galvanised Brad Nails & Fuel (2000) BOS18G32FC BT13 Series Galvanised 18 Gauge Brad Nails and Fuel.To Suit GBT1850K Cordless Gas Brad NailerFinish nails (Brads) and T nails are normally of a rectangular cross section instead of being round.Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads.Gauge/Diameter (mm) 18 GA Length 32 SKU 18G32FC Finish GALV Description Galvanised 32mm 18 Gauge Brad NailsQty per box 2000 Finish Nails 1 x Fuel Cell To Suit GBT1850K Cordless Gas Brad Nailer BOS18G32FC Minimize

Bostitch 3.1 x 90mm PaperTape 33° Nails & Fuel Smooth Sh ... Read more

Bostitch 3.1 x 90mm PaperTape 33° Nails & Fuel Smooth Shank Galvanised (2200) BOS3190G12FC PT PaperTape Series Smooth Shank Clipped Head 33° Nails & Fuel.Profile: SmoothSmooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lowest of the group. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them.Finish: PlainPlain finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. Finish: GalvanisedGalvanised Nails. Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc.Paper Tape Collated Stick Nails, this type of collation is ideal in construction environments where work can be kept free of collation debris. Paper tape nails traditionally have a clipped head to allow the shanks of the nails to touch each other when they are collated. In this way it is possible to fit more nails on a stick.Gauge/Diameter (mm) 3.1 Length 90 Clipped Head 33°SKU PT3190G12FC Profile SMOOTH Finish GALV Description Galvanised Smooth Shank 3.1 x 90mm NailsFuel Cell Qty per box 2200 Will also fit GF33PT-E, GF33PT-U BOS3190G12FC Minimize

Bostitch 2.5 x 45mm 21° Stick Nails Ring Shank Galvanised ... Read more

Bostitch 2.5 x 45mm 21° Stick Nails Ring Shank Galvanised (2000) BOSRH25R4550Packs of 2000 Round head nails.These plastic collated stick nails traditionally have a full round head, while only giving marginally better holding power to clipped head nails, they are preferred by the construction industry. Collation is angled at 21° to accommodate the overlapping heads.Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them.Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater.Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish.Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thic Minimize

Bostitch RH28R75G50 2.8mm Ring Nail x 75mm Galvanised Pack ... Read more

Bostitch RH28R75G50 2.8mm Ring Nail x 75mm Galvanised Pack of 2000 BOSRH28R7550Packs of 2000 Round head nails.These plastic collated stick nails traditionally have a full round head, while only giving marginally better holding power to clipped head nails, they are preferred by the construction industry. Collation is angled at 21° to accommodate the overlapping heads.Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them.Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater.Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish.Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicke Minimize

Bostitch 38mm 18 Gauge Galvanised Brad Nails & Fuel (2000) ... Read more

Bostitch 38mm 18 Gauge Galvanised Brad Nails & Fuel (2000) BOS18G38FC BT13 Series Galvanised 18 Gauge Brad Nails and Fuel.To Suit GBT1850K Cordless Gas Brad NailerFinish nails (Brads) and T nails are normally of a rectangular cross section instead of being round.Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads.Gauge/Diameter (mm) 18 GA Length 38 SKU 18G38FC Finish GALV Description Galvanised 38mm 18 Gauge Brad NailsQty per box 2000 Finish Nails 1 x Fuel Cell To Suit GBT1850K Cordless Gas Brad Nailer BOS18G38FC Minimize

Bostitch 64mm Angled Finish Nails 15 Gauge Galvanised Pack ... Read more

Bostitch 64mm Angled Finish Nails 15 Gauge Galvanised Pack 3655 BOSFN1540 Fixing nails for the N62 FNK-2 finish power nailer.25° Collation AngleFinish Nails and Brads have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads.Note: This nail will also fit the N60FN and the N59FNK models.Applications - Partition walls, shop and bar fitting, light framing and timber construction and most second fit applications.Type - 15 gauge angled finish nail.Finish - Galvanised.Length - 64mm.QTY - Box 3655. BOSFN1540 Minimize

Bostitch 50mm 16 Gauge Straight Galvanised Finish Nails & F ... Read more

Bostitch 50mm 16 Gauge Straight Galvanised Finish Nails & Fuel Cell (2000) BOS16G50FC SB16 series galvanised 16 gauge straight finish nails & fuel cell to suit GFN1664K cordless nailers.Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries. Finish nails and brads have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, round or clipped heads.Quantity per box 2000 nailsLength 50mm (2 in) BOS16G50FC Minimize

Bostitch 3.1 x 70mm PaperTape 33° Nails & Fuel Ring Shank ... Read more

Bostitch 3.1 x 70mm PaperTape 33° Nails & Fuel Ring Shank Plain (2200) BOS31R70FC PT Series Ring Shank Clipped Head 33° Nails & Fuel.Profile: RingRing shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater.Finish: PlainPlain finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. Finish: GalvanisedGalvanised Nails. Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc.Finish: Stainless SteelStainless Steel nails are used when other finishes are not sufficient and need the maximum protection we can offer. For example: stainless steel nails are ideal motorway fencing where a fasteners life is very important or in applications which are exposed to salt water. Paper Tape Collated Stick Nails, this type of collation is ideal in construction environments where work can be kept free of collation debris. Paper tape nails traditionally have a clipped head to allow the shanks of the nails to touch each other when they are collated. In this way it is possible to fit more nails on a stick. BOS31R70FC Minimize

Bostitch 38mm Angled Finish Nails 15 Gauge Galvanised Pack ... Read more

Bostitch 38mm Angled Finish Nails 15 Gauge Galvanised Pack 3655 BOSFN1524 Fixing nails for the N62 FNK-2 finish power nailer.25° Collation AngleFinish Nails and Brads have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads.Note: This nail will also fit the N60FN and the N59FNK models.Applications - Partition walls, shop and bar fitting, light framing and timber construction and most second fit applications.Type - 15 gauge angled finish nailFinish - GalvanisedLength - 38mmQTY - Box 3655 BOSFN1524 Minimize

Bostitch 38mm 16 Gauge Straight Galvanised Finish Nails & F ... Read more

Bostitch 38mm 16 Gauge Straight Galvanised Finish Nails & Fuel Cell (2000) BOS16G38FC SB16 series galvanised 16 gauge straight finish nails & fuel cell to suit GFN1664K cordless nailers.Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries. Finish nails and brads have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, round or clipped heads.Quantity per box 2000 nailsLength 38mm (1 1/2 in) BOS16G38FC Minimize

Bostitch 32mm 16 Gauge Straight Galvanised Finish Nails & F ... Read more

Bostitch 32mm 16 Gauge Straight Galvanised Finish Nails & Fuel Cell (2000) BOS16G32FC SB16 series galvanised 16 gauge straight finish nails & fuel cell to suit GFN1664K cordless nailers.Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries. Finish nails and brads have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, round or clipped heads.Quantity per box 2000 nailsLength 32mm (1 1/4 in) BOS16G32FC Minimize

Bostitch 2.8 x 75mm Paper Tape 33° Nails & Fuel Ring Shank ... Read more

Bostitch 2.8 x 75mm Paper Tape 33° Nails & Fuel Ring Shank Plain (2200) BOS28R75FC PT Series Ring Shank Clipped Head 33° Nails & Fuel.Profile: RingRing shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater.Finish: PlainPlain finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. Finish: GalvanisedGalvanised Nails. Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc.Finish: Stainless SteelStainless Steel nails are used when other finishes are not sufficient and need the maximum protection we can offer. For example: stainless steel nails are ideal motorway fencing where a fasteners life is very important or in applications which are exposed to salt water. Paper Tape Collated Stick Nails, this type of collation is ideal in construction environments where work can be kept free of collation debris. Paper tape nails traditionally have a clipped head to allow the shanks of the nails to touch each other when they are collated. In this way it is possible to fit more nails on a stick. BOS28R75FC Minimize

Bostitch 2.8 x 50mm Paper Tape 33° Nails & Fuel Ring Shank ... Read more

Bostitch 2.8 x 50mm Paper Tape 33° Nails & Fuel Ring Shank Plain (2200) BOS28R50FC PT Series Ring Shank Clipped Head 33° Nails & Fuel.Profile: RingRing shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater.Finish: PlainPlain finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. Finish: GalvanisedGalvanised Nails. Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc.Finish: Stainless SteelStainless Steel nails are used when other finishes are not sufficient and need the maximum protection we can offer. For example: stainless steel nails are ideal motorway fencing where a fasteners life is very important or in applications which are exposed to salt water. Paper Tape Collated Stick Nails, this type of collation is ideal in construction environments where work can be kept free of collation debris. Paper tape nails traditionally have a clipped head to allow the shanks of the nails to touch each other when they are collated. In this way it is possible to fit more nails on a stick. BOS28R50FC Minimize

Bostitch 50mm 18 Gauge Galvanised Brad Nails & Fuel (2000) ... Read more

Bostitch 50mm 18 Gauge Galvanised Brad Nails & Fuel (2000) BOS18G50FC BT13 Series Galvanised 18 Gauge Brad Nails and Fuel.To Suit GBT1850K Cordless Gas Brad NailerFinish nails (Brads) and T nails are normally of a rectangular cross section instead of being round.Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads.Gauge/Diameter (mm) 18 GA Length 50 SKU 18G50FC Finish GALV Description Galvanised 50mm 18 Gauge Brad NailsQty per box 2000 Finish Nails 1 x Fuel Cell To Suit GBT1850K Cordless Gas Brad Nailer BOS18G50FC Minimize

Bostitch 38mm 18 Gauge Galvanised Brad Nails & Fuel (2000) ... Read more

Bostitch 38mm 18 Gauge Galvanised Brad Nails & Fuel (2000) BOS18G38FC BT13 Series Galvanised 18 Gauge Brad Nails and Fuel.To Suit GBT1850K Cordless Gas Brad NailerFinish nails (Brads) and T nails are normally of a rectangular cross section instead of being round.Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads.Gauge/Diameter (mm) 18 GA Length 38 SKU 18G38FC Finish GALV Description Galvanised 38mm 18 Gauge Brad NailsQty per box 2000 Finish Nails 1 x Fuel Cell To Suit GBT1850K Cordless Gas Brad Nailer BOS18G38FC Minimize

Bostitch 32mm 16 Gauge Straight Galvanised Finish Nails & F ... Read more

Bostitch 32mm 16 Gauge Straight Galvanised Finish Nails & Fuel Cell (2000) BOS16G32FC SB16 series galvanised 16 gauge straight finish nails & fuel cell to suit GFN1664K cordless nailers.Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries. Finish nails and brads have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, round or clipped heads.Quantity per box 2000 nailsLength 32mm (1 1/4 in) BOS16G32FC Minimize

Bostitch 2.8 x 75mm Paper Tape 33° Nails & Fuel Ring Sha ... Read more

Bostitch 2.8 x 75mm Paper Tape 33° Nails & Fuel Ring Shank Plain (2200) BOS28R75FC PT Series Ring Shank Clipped Head 33° Nails & Fuel.Profile: RingRing shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater.Finish: PlainPlain finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. Finish: GalvanisedGalvanised Nails. Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc.Finish: Stainless SteelStainless Steel nails are used when other finishes are not sufficient and need the maximum protection we can offer. For example: stainless steel nails are ideal motorway fencing where a fasteners life is very important or in applications which are exposed to salt water. Paper Tape Collated Stick Nails, this type of collation is ideal in construction environments where work can be kept free of collation debris. Paper tape nails traditionally have a clipped head to allow the shanks of the nails to touch each other when they are collated. In this way it is possible to fit more nails on a stick. BOS28R75FC Minimize

Bostitch 32mm 18 Gauge Galvanised Brad Nails & Fuel (2000) ... Read more

Bostitch 32mm 18 Gauge Galvanised Brad Nails & Fuel (2000) BOS18G32FC BT13 Series Galvanised 18 Gauge Brad Nails and Fuel.To Suit GBT1850K Cordless Gas Brad NailerFinish nails (Brads) and T nails are normally of a rectangular cross section instead of being round.Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads.Gauge/Diameter (mm) 18 GA Length 32 SKU 18G32FC Finish GALV Description Galvanised 32mm 18 Gauge Brad NailsQty per box 2000 Finish Nails 1 x Fuel Cell To Suit GBT1850K Cordless Gas Brad Nailer BOS18G32FC Minimize

Bostitch 38mm 16 Gauge Straight Galvanised Finish Nails & F ... Read more

Bostitch 38mm 16 Gauge Straight Galvanised Finish Nails & Fuel Cell (2000) BOS16G38FC SB16 series galvanised 16 gauge straight finish nails & fuel cell to suit GFN1664K cordless nailers.Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries. Finish nails and brads have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, round or clipped heads.Quantity per box 2000 nailsLength 38mm (1 1/2 in) BOS16G38FC Minimize

Bostitch 2.8 x 50mm Paper Tape 33° Nails & Fuel Ring Sha ... Read more

Bostitch 2.8 x 50mm Paper Tape 33° Nails & Fuel Ring Shank Plain (2200) BOS28R50FC PT Series Ring Shank Clipped Head 33° Nails & Fuel.Profile: RingRing shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater.Finish: PlainPlain finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. Finish: GalvanisedGalvanised Nails. Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc.Finish: Stainless SteelStainless Steel nails are used when other finishes are not sufficient and need the maximum protection we can offer. For example: stainless steel nails are ideal motorway fencing where a fasteners life is very important or in applications which are exposed to salt water. Paper Tape Collated Stick Nails, this type of collation is ideal in construction environments where work can be kept free of collation debris. Paper tape nails traditionally have a clipped head to allow the shanks of the nails to touch each other when they are collated. In this way it is possible to fit more nails on a stick. BOS28R50FC Minimize

Bostitch 50mm 18 Gauge Galvanised Brad Nails & Fuel (2000) ... Read more

Bostitch 50mm 18 Gauge Galvanised Brad Nails & Fuel (2000) BOS18G50FC BT13 Series Galvanised 18 Gauge Brad Nails and Fuel.To Suit GBT1850K Cordless Gas Brad NailerFinish nails (Brads) and T nails are normally of a rectangular cross section instead of being round.Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads.Gauge/Diameter (mm) 18 GA Length 50 SKU 18G50FC Finish GALV Description Galvanised 50mm 18 Gauge Brad NailsQty per box 2000 Finish Nails 1 x Fuel Cell To Suit GBT1850K Cordless Gas Brad Nailer BOS18G50FC Minimize

Bostitch 3.1 x 70mm PaperTape 33° Nails & Fuel Ring Shan ... Read more

Bostitch 3.1 x 70mm PaperTape 33° Nails & Fuel Ring Shank Plain (2200) BOS31R70FC PT Series Ring Shank Clipped Head 33° Nails & Fuel.Profile: RingRing shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater.Finish: PlainPlain finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. Finish: GalvanisedGalvanised Nails. Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc.Finish: Stainless SteelStainless Steel nails are used when other finishes are not sufficient and need the maximum protection we can offer. For example: stainless steel nails are ideal motorway fencing where a fasteners life is very important or in applications which are exposed to salt water. Paper Tape Collated Stick Nails, this type of collation is ideal in construction environments where work can be kept free of collation debris. Paper tape nails traditionally have a clipped head to allow the shanks of the nails to touch each other when they are collated. In this way it is possible to fit more nails on a stick. BOS31R70FC Minimize

Bostitch 50mm 16 Gauge Straight Galvanised Finish Nails & F ... Read more

Bostitch 50mm 16 Gauge Straight Galvanised Finish Nails & Fuel Cell (2000) BOS16G50FC SB16 series galvanised 16 gauge straight finish nails & fuel cell to suit GFN1664K cordless nailers.Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries. Finish nails and brads have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, round or clipped heads.Quantity per box 2000 nailsLength 50mm (2 in) BOS16G50FC Minimize

brand synseal shield material upvc style bi folding doors s ... Read more

brand synseal shield material upvc style bi folding doors sub type bifold doors type doors brand new upvc bifold door set made to measure for widths between 3 2 m 3 59 m supplied delivered and fitted other sizes available on request please call for a price office 01302742111 or out of hrs 07795107301 the doors can be opened from the centre folded back to both sides or a full one way sliding door set specification multipoint locking system to the master door steel reinforced profiles 28 mm toughe Minimize

Bostitch 20mm 18 Gauge Galvanised Brad Nails & Fuel (2000) ... Read more

Bostitch 20mm 18 Gauge Galvanised Brad Nails & Fuel (2000) BOS18G20FC BT13 Series Galvanised 18 Gauge Brad Nails and Fuel.To Suit GBT1850K Cordless Gas Brad NailerFinish nails (Brads) and T nails are normally of a rectangular cross section instead of being round.Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads.Gauge/Diameter (mm) 18 GA Length 20 SKU 18G20FC Finish GALV Description Galvanised 20mm 18 Gauge Brad NailsQty per box 2000 Finish Nails 1 x Fuel Cell BOS18G20FC Minimize

Economical coating for brick, tin & steelwork. Previously c ... Read more

Economical coating for brick, tin & steelwork. Previously certified to BS3416 (WRC APPROVED). General purpose water proofer. Full bodied and easy to apply. Gloss finish turns matt with long UV exposure. Contains white spirit. Coverage 8-10m2 per litre. (Surface depending), Manufacturer: Bird Brand Minimize