> Car Speakers and Subwoofers > car audio speakers and subwoofers

It can be argued that beauty is only skin deep, but the Edg ... Read more

It can be argued that beauty is only skin deep, but the Edge subwoofers prove this is not always the case. The electroplated cone certainly looks fantastic and thanks to the horn shaped centre section the surface area has been greatly increased to maximise the bass produced. The hi-roll rubber surround keeps everything in control and allows for the high power handling capabilities. Internally there is a ferrite magnet and this forms a powerful motor structure when combined with the dual 2 ohm voice coil. Minimize

It can be argued that beauty is only skin deep, but the Edg ... Read more

It can be argued that beauty is only skin deep, but the Edge subwoofers prove this is not always the case. The electroplated cone certainly looks fantastic and thanks to the horn shaped centre section the surface area has been greatly increased to maximise the bass produced. The hi-roll rubber surround keeps everything in control and allows for the high power handling capabilities. Internally there is a ferrite magnet and this forms a powerful motor structure when combined with the dual 2 ohm voice coil. Minimize

The newest T1 Audio component speakers deliver huge output ... Read more

The newest T1 Audio component speakers deliver huge output without even a hint of distortion. Take your vehicle's audio system to the next level of sonic sophistication with one of T1 Audios component speaker Kits. These high-performance components offer rock solid bass from a poly woofer coupled with a durable hi-roll rubber surround. The oversized Plus One cone design has more surface area and greater excursion than standard cones, so low-frequency output is full and resonant. Specifications : ? 5.25" Component speaker system? Midbass:6.5oz maget/1" ASV voice coil ? Injection PP cone with Rubber surround? Tweeter: 1"Silk Dome? Crossover: 18dB ? Max power: 200W ? Frequency response: 70Hz-20 KHz? Sensitivity: 89dB Minimize

The new T1 Audio T1-15AT amplified bass box provides all th ... Read more

The new T1 Audio T1-15AT amplified bass box provides all the power you need for a chest pounding audio experience, combining the sleek looks and power of the 1200 watt amplifier with an aggression. A slot ported enclosure housing a 1200 watt single voice coil 15" subwoofer. The T1 enclosure is ruggedly constructed using MDF and aviation grade black vinyl with a carpeted covered baffle board on either side of the enclosure. The T1 subwoofer is capable of handling 400W RMS and is based on solid construction including 2" voice coil and 50 oz. magnet. The T1-15AT will deliver rock solid performance at an unbeatable price. Minimize

The Edge component speakers combine stunning design and per ... Read more

The Edge component speakers combine stunning design and performance in an end product which sets a new edge against the competition. A good set of components can really bring your system to life. The Edge two way components certainly do that, their inverted dust cap increases the surface area of the injection moulded polypropylene cone to improve bass response, while the silk dome tweeter provides the necessary highs with delicacy and poise normally reserved for much more expensive examples. The cone is electroplated in the eye catching Edge orange. Please Note: All The New Stock Now Comes with Built-In Crossovers and Separate Crossovers are No Longer Required and Supplied by Edge Audio in the box. Minimize

SPACE Level 4 brings true reference performance and extreme ... Read more

SPACE Level 4 brings true reference performance and extreme power handling and out of this world performance for everyday sonic enjoyment. Aluminium components, class GH amplifiers and award winning subwoofers. Front gasket made from high quality machined aluminium. Aluminium voice coil former that transfers heat to the woofer cone which is used as an additional radiator. Separate passive crossover network which is far superior to inline filters. Silk dome tweeter diaphragm produces smooth extended high frequency responses. Removable steel mesh grill provides excellent protection for the speaker. Extended low frequency response with extreme accuracy, the ability to produce weight and snap without compromise. Esoteric cone material made from 0.15 mm aluminium offers excellent dynamics and musicality. Benefits of a PU with an improved bass response. Cast aluminium angular torsion chassis offers superior strength and thermal power handling. Screw down terminals allows heavy gauge cable to be connected directly to the voice coil. Single spider provides control and stability of the woofer cone. Single ferrite magnet provides motor strength and high power handling. Minimize

The new T1 Audio T1-10AB amplified bass box provides all th ... Read more

The new T1 Audio T1-10AB amplified bass box provides all the power you need for a chest pounding audio experience, combining the sleek looks and power of the 1000 watt amplifier with an aggression. A slot ported enclosure housing a 1000 watt single voice coil 10" subwoofer. The T1 enclosure is ruggedly constructed using MDF and aviation grade black vinyl with a carpeted covered baffle board on either side of the enclosure. The T1 subwoofer is capable of handling 400W RMS and is based on solid construction including 2" voice coil and 48 oz. magnet. The T1-10AB will deliver rock solid performance at an unbeatable price. Minimize

The new T1 Audio T1-12AB amplified bass box provides all th ... Read more

The new T1 Audio T1-12AB amplified bass box provides all the power you need for a chest pounding audio experience, combining the sleek looks and power of the 1200 watt amplifier with an aggression. A slot ported enclosure housing a 1200 watt single voice coil 12" subwoofer. The T1 enclosure is ruggedly constructed using MDF and aviation grade black vinyl with a carpeted covered baffle board on either side of the enclosure. The T1 subwoofer is capable of handling 400W RMS and is based on solid construction including 2" voice coil and 48 oz. magnet. The T1-12AB will deliver rock solid performance at an unbeatable price. Minimize

The new T1 Audio T1-10ATT amplified bass box provides all t ... Read more

The new T1 Audio T1-10ATT amplified bass box provides all the power you need for a chest pounding audio experience, combining the sleek looks and power of the 1400 watt amplifier with an aggression. A slot ported enclosure housing a 1400 watt single voice coil 10" subwoofer. The T1 enclosure is ruggedly constructed using MDF and aviation grade black vinyl with a carpeted covered baffle board on either side of the enclosure. The T1 subwoofer is capable of handling 350W RMS and is based on solid construction including 2" voice coil and 30 oz. magnet. The T1-10ATT will deliver rock solid performance at an unbeatable price. Minimize

This good quality black carpet comes as 1 single piece that ... Read more

This good quality black carpet comes as 1 single piece that is 1M long by approx 1M wide. Features Black trimming carpet Thick trunkliner material Ideal for covering car parcel shelves, subwoofer boxes and ICE installs Also great for trimming out vans, car boots and caravans etc Easy to cut and shape Can be stapled in place or stuck using spray glue (available separately) Picture shown for illustration only - you are buying the size mentioned above Minimize

SPACE Level 4 brings true reference performance and extreme ... Read more

SPACE Level 4 brings true reference performance and extreme power handling and out of this world performance for everyday sonic enjoyment. Aluminium components, class GH amplifiers and award winning subwoofers. Front gasket made from high quality machined aluminium. Dual 2 ohm voice coil offers a choice of 1 or 4 ohm loads to maximise compatibility with a wide range of amplifiers. Screw down terminals allows heavy gauge cable to be connected directly to the voice coil. Super rigid 1 piece aluminium woofer cone delivers unmatched weight and dynamics. Aluminium voice coil former that transfers heat to the woofer cone which is used as an additional radiator. Dual progressive spiders provides control and stability of the woofer cone coupled with high power handling. High performance machine cast aluminium basket. Freer cone movement, purer bass, less distortion. Double stacked ferrite magnet offers immense motor strength and power handling. Rubber magnet boot protects the magnet and can be removed for shallower installation depth. Minimize

High efficient foam edge. Power handling (max): 180w max mu ... Read more

High efficient foam edge. Power handling (max): 180w max music. Frequency response 45Hz - 20 KHz. Sensity (dB SPL): 91dB@ W/M. Impedance: 4 Ohms. Components : 8" polymer carbonate cone. 2.3" pp dome tweeter. 1" High temp voice coil. 20 Oz magnet structure. Minimize

The ZERO speaker range from Midbass is an entry level affor ... Read more

The ZERO speaker range from Midbass is an entry level affordable addition to any vehicle sound system with sound quality that will certainly send a chill down your spine, incorporating cool smooth looks to set off the styling of any vehicle. The speaker range comes in typical sizes of 4,5 6, and 6x9 inch speakers implementing a lightweight IMPP cone for excellent sound quality and enhanced bass response all topped with styling cooler than a slush puppy's danglers. Minimize

If you're looking for the best Marine Audio, you're looking ... Read more

If you're looking for the best Marine Audio, you're looking for Wet Sounds. Hearing is truly believing when it comes to this new generation of product.The XS-650 is a component style coaxial that delivers rich mid-bass and will give even the most hardened audiophile a goose-bump moment!- Silver Grill- Rubber Spider & Surround- Nylas frame/grille (Nylon Fibreglass)- Injection moulded composite cone- Horn Flare Titanium Tweeter- Rubber Magnet BootSpecs include:- 100 Watts RMS / 200 Watts Peak per speaker.- 4 ohm impedance- Frequency Response @ 40hz to 20khz- Sensitivity of 90DB @ 1 watt/1 metre- 6.8? diameter with grill (5.6? cut-out required)- 7.8lbs weight per pairFully Marine Suitable Minimize

The Edge range of 4-way coaxial speakers combine stunning d ... Read more

The Edge range of 4-way coaxial speakers combine stunning design and performance in an end product which sets a new edge against the competition. The unique electroplated IMPP cone has been formulated to offer increased bass response whilst the PEI midrange and tweeter units offer crystal clear highs. The range of size options available ensure that Edge coaxial speakers are a direct fit for almost every vehicle on the market today. Minimize

The Edge range of 4-way coaxial speakers combine stunning d ... Read more

The Edge range of 4-way coaxial speakers combine stunning design and performance in an end product which sets a new edge against the competition. The unique electroplated IMPP cone has been formulated to offer increased bass response whilst the PEI midrange and tweeter units offer crystal clear highs. The range of size options available ensure that Edge coaxial speakers are a direct fit for almost every vehicle on the market today. Minimize

The ZERO speaker range from Midbass is an entry level affor ... Read more

The ZERO speaker range from Midbass is an entry level affordable addition to any vehicle sound system with sound quality that will certainly send a chill down your spine, incorporating cool smooth looks to set off the styling of any vehicle. The speaker range comes in typical sizes of 4,5 6, and 6x9 inch seakers implementing a lightweight IMPP cone for excellent sound quality and enhanced bass response all topped with styling cush puppy's danglers. Minimize

Fli FF12-F3 1200 Watts 25cm 12" Frequency Subwoofer SubThe ... Read more

Fli FF12-F3 1200 Watts 25cm 12" Frequency Subwoofer SubThe FLi FF12-F3 rubber gasket ads style and provides and air tight seal for the subwoofer, with electroplated IMPP woofer cone to deliver fast articulated bass. The Fli FF12-F3 has a Butyl rubber surround which delivers improves frequency response and finished off with nickel plate terminals to allow heavy gauge wire to be connected directly to the voice coil.Specifications :Type : subwooferSpeaker size : 12" (324mm)RMS power : 400 wattsPeak power : 1200 wattsMinimum input : 200 watts RMSFrequency response : 25Hz - 1500HzMounting diameter : 285mmMounting depth : 144mmImpedance : single 4 ohm Minimize

SLICK is VIBE's entry level product, making VIBE performanc ... Read more

SLICK is VIBE's entry level product, making VIBE performance and design affordable to everyone. Rubber detailing gives the entire range a unique and appealing look, feel and sound. The Slick range features coaxial speakers, stereo and mono amplifiers, subwoofers and the SLR enclosures. Rubber gasket ensures a perfect seal when mounting the speaker. Single ferrite magnet provides motor strength and high power handling. Single spider provides control and stability of the woofer cone. Offers extended high frequency response. Shallow mounting depth and aslim manget profile allows maximum installation flexibility. Single ferrite magnet provides motor strength and high power handling. Rigid injection moulded polypropylene woofer cone delivers smooth low frequency response. Spade terminal allows ease of installation with minimal terminal protrusion. Cast aluminium angular torsion chassis offers superior strength and thermal power handling. Inverted concave rubber surround geometrys. Rubber magnet boot protects the magnet and can be removed for shallower installation depth. Minimize

White speaker box wadding Helps reduce resonance within spe ... Read more

White speaker box wadding Helps reduce resonance within speaker cabinets & subwoofer boxes Prevents any unwanted mid-range frequencies from reflecting through the speaker's cone material 1m x 1m size Minimize

SLICK is VIBE's entry level product, making VIBE performanc ... Read more

SLICK is VIBE's entry level product, making VIBE performance and design affordable to everyone. Rubber detailing gives the entire range a unique and appealing look, feel and sound. The Slick range features coaxial speakers, stereo and mono amplifiers, subwoofers and the SLR enclosures. Slick Subwoofer loaded into the enclosure. Sealed enclosure for high power handling. Spring loaded terminals. System combines single enclosures into a twin unit.. High quality AWG 13 speaker cable. Eliminates negative effects of sealed enclosure design. Minimize

If you're looking for the best Marine Audio, you're looking ... Read more

If you're looking for the best Marine Audio, you're looking for Wet Sounds. Hearing is truly believing when it comes to this new generation of product.The XS-10FA is a 10 inch Free Air marine subwoofer to add low-down punch to your tunes. Unlike other subs the Wet Sounds unit does not require an enclosure due to the clever use of an 'infinite baffle' design. The result being an easy install that delivers major bump!- Powder Coated Cast Aluminium Frame- Gold plated speaker terminals- Injection Moulded Composite Cone- Rubber spider & surround- Comes with signature Wet Sounds Grill.Specs Include:- 250 Watts RMS / 500 Watts Peak- Dual 4 ohm Voice Coil- Frequency Response @ 20hz-500hz- Sensitivity of 88DB @ 1 watt/1 metre- The unit if optimised for free-air applications or the use of a .7CF enclosure- 8.1lb weight Minimize

The new VIBE subwoofer defender not only provides protectio ... Read more

The new VIBE subwoofer defender not only provides protection for your sub but also adds style with its metallic badge and black rubberised steel construction integrates perfectly with the VIBE EVO enclosures - The perfect finish to any install. The VIBE SD5 Defender fits 15" subwoofers. It is designed to be compatible with most 15" subwoofers. Includes 1 Defender, alloy spacers and fixing screws. Minimize

The Edge component speakers combine stunning design and per ... Read more

The Edge component speakers combine stunning design and performance in an end product which sets a new edge against the competition. A good set of components can really bring your system to life. The Edge two way components certainly do that, their inverted dust cap increases the surface area of the injection moulded polypropylene cone to improve bass response, while the silk dome tweeter provides the necessary highs with delicacy and poise normally reserved for much more expensive examples. The cone is electroplated in the eye catching Edge orange. Please Note: All The New Stock Now Comes with Built-In Crossovers and Separate Crossovers are No Longer Required and Supplied by Edge Audio in the box. Minimize

SS3327 Sub-Zero 16.5cm (6.5in) Coaxial Car Audio Speakers1i ... Read more

SS3327 Sub-Zero 16.5cm (6.5in) Coaxial Car Audio Speakers1in ASV voice coilLightweight polypropylene cone80x15mm magnet with rubber boot40mm dome tweeterFrequency response - 20-85KHzSensitivity - 88dBPower RMS/MAX - 70/220 watts Minimize

Color: Black; Weight: 145g; Built in crossover, fit for ca ... Read more

Color: Black; Weight: 145g; Built in crossover, fit for car aduio system, provides 93dB pure sound for you; Powerful adhesive tape included for easier installation. Minimize

This Edge bass pack enclosure has been packaged together wi ... Read more

This Edge bass pack enclosure has been packaged together with Edge amplifier and wiring kit for instant well matched results. The electroplated cone certainly looks fantastic and thanks to the horn shaped centre section the surface area has been greatly increased to maximise the bass produced. The hi-roll rubber surround keeps everything in control and allows for the high power handling capabilities. Internally there is a ferrite magnet and this forms a powerful motor structure when combined with the dual 2 ohm voice coil. The heavyweight box features a 4" tuned port allowing it to drop deeper and punch harder than anything else around. This bass pack offers greater bass for greater value. Minimize