> lighting1

JB Lighting Licon 1X Tourpack Lighting Controller - 1024 DM ... Read more

JB Lighting Licon 1X Tourpack Lighting Controller - 1024 DMX channels for moving heads and dimmers, up to 32 moving lights (max. 25 channels each), 96 PAR channels. 16 keys for direct control of moving lights/PARs, graphical LCD display, pan/tilt control via encoders or optional trackball, 8/16-bit pan/tilt channels, direct access to up to 136 cues and 64 chases, 12 sliders for PAR cues/chases, 3 master faders, up to 32 simultaneous chases, effect generator for fast programming of chases, pre-programmed moving patterns, remote control via MIDI, software updates via PC connection, backup to USB memory stick. Includes case, Littlite lamp, trackball and 64MB USB stick. Lighting / Light Controllers Minimize

The RAYFLASH Adapter is a very affordable way to achieve ty ... Read more

The RAYFLASH Adapter is a very affordable way to achieve typical ringflash lighting quality normally only available to studio flash equipment users! The unique RAY FLASH Adapter was developed by a professional photographer from the Czech Republic. It was designed to be as light and as portable as possible. There are no electronics, no flashtubes and no cumbersome cables! It uses a clever system of acrylic light channels and reflectors to distribute the light emitted from the flash unit evenly around the large diameter of the ringflash adapter. This creates the same lighting effect normally only available from ringflash units made by studio flash equipment manufacturers, which are expensive, heavy and tethered (they have a cable from ringflash to power pack). The RAY FLASH Adapter creates a very special lighting effect: a 3-d shadow-wrapped look . Because all light originates from the front, i.e. from around the lens, it produces a virtually shadow-less look on the front of your subject, while a soft even shadow appears around the edges. It is ideally suited for fashion, portrait, beauty, wedding & macro photography as a main or fill-in light. The RAY FLASH Adapter does not change the colour temperature of the flash that powers it and the additional weight can easily be accommodated by the on-camera flash unit. The RAY FLASH Adapter is made to fit the Canon 580EX, Canon 580EXII and Nikon SB-800, Nikon SB-900 flash units and due to the its large inner diameter the ringflash adapter will accept almost all lenses from Nikon & Canon. This model is compatible with: Minimize

The RAYFLASH Adapter is a very affordable way to achieve ty ... Read more

The RAYFLASH Adapter is a very affordable way to achieve typical ringflash lighting quality normally only available to studio flash equipment users! The unique RAY FLASH Adapter was developed by a professional photographer from the Czech Republic. It was designed to be as light and as portable as possible. There are no electronics, no flashtubes and no cumbersome cables! It uses a clever system of acrylic light channels and reflectors to distribute the light emitted from the flash unit evenly around the large diameter of the ringflash adapter. This creates the same lighting effect normally only available from ringflash units made by studio flash equipment manufacturers, which are expensive, heavy and tethered (they have a cable from ringflash to power pack). The RAY FLASH Adapter creates a very special lighting effect: a 3-d shadow-wrapped look . Because all light originates from the front, i.e. from around the lens, it produces a virtually shadow-less look on the front of your subject, while a soft even shadow appears around the edges. It is ideally suited for fashion, portrait, beauty, wedding & macro photography as a main or fill-in light. The RAY FLASH Adapter does not change the colour temperature of the flash that powers it and the additional weight can easily be accommodated by the on-camera flash unit. The RAY FLASH Adapter is made to fit the Canon 580EX, Canon 580EXII and Nikon SB-800, Nikon SB-900 flash units and due to the its large inner diameter the ringflash adapter will accept almost all lenses from Nikon & Canon. This model is compatible with: Minimize

LumiDMX X1 Lighting Control + X13D Basic - innovative solut ... Read more

LumiDMX X1 Lighting Control + X13D Basic - innovative solution to control lighting systems via PC. In combination with a USB-DMX interface, LumiDMX enables control of up to 16x DMX universes. Multimedia Timeline creates instantly complex and perfectly synchronized audio/light shows. Using a beat analysis function, lighting sequences can be adapted automatically to the pieces of music. Due to easy handling by means of drag & drop, your show is created with just a few clicks. Effect generator for automatic creation of lighting sequences. With the live panel designer, you can design your own customized control surface. Remote control your complete live panel with all objects by MIDI or shortcuts. LumiDMX is delivered with a device library including over 50 manufacturers. You can also add your complete lighting inventory to your project. Already included are all settings for light, gobos, shutter and colours etc. If your device is not included, you can create it by yourself with the integrated ScanEditor or we do it for you. Includes real-time 3D simulation, real-time rendering software LumiDMX3D. This simulator is able to pre-program your complete show in 3D with an amazing level of reality. All devices are patched automatically. By a powerful function named DMX transformation, it is possible to realize complete stage technology systems like curtains, turntables, winches, lifts and much more. LumiDMX3D Real-Time Visualization included, - 3D-ESP Vision Support, - 3D-WYSIWYG Support, - Shows, Sequences, Cues unlimited, - Macros & Command Line, - MIDI & BPM Triggering, - Free Update and Support available, - And much more!, Minimum system requirements:, - Windows 32/64Bit-XP/Vista/Seven , - 1GHz Processor-256MB of RAM (recommended 1GB) , - 128MB of Graphics memory (Pixel shaders 2.0 recommended), - 200MB of Free disk space, - Display resolution of 1024x768 (higher recommended) , - CD-ROM (for installation from CD)-USB 1.0 or USB 2.0, Scope of delivery (Download version): , USB Security dongle; software download at www.lumiDMX.com, !!! Please note our general conditions bying software products !!!, LumiDMX X13D is a real-time 3D software for pre-visualization of light and multimedia shows. By using latest 3D Gaming Technologies, X13D reaches a nearly photorealistic level of reality. From visualization of a mobile DJ stage to a complete simulation of a theatre, X13D makes it possible and this in real time. Lighting / Light Controllers Minimize

The RAYFLASH Adapter is a very affordable way to achieve ty ... Read more

The RAYFLASH Adapter is a very affordable way to achieve typical ringflash lighting quality normally only available to studio flash equipment users! The unique RAY FLASH Adapter was developed by a professional photographer from the Czech Republic. It was designed to be as light and as portable as possible. There are no electronics, no flashtubes and no cumbersome cables! It uses a clever system of acrylic light channels and reflectors to distribute the light emitted from the flash unit evenly around the large diameter of the ringflash adapter. This creates the same lighting effect normally only available from ringflash units made by studio flash equipment manufacturers, which are expensive, heavy and tethered (they have a cable from ringflash to power pack). The RAY FLASH Adapter creates a very special lighting effect: a 3-d shadow-wrapped look . Because all light originates from the front, i.e. from around the lens, it produces a virtually shadow-less look on the front of your subject, while a soft even shadow appears around the edges. It is ideally suited for fashion, portrait, beauty, wedding & macro photography as a main or fill-in light. The RAY FLASH Adapter does not change the colour temperature of the flash that powers it and the additional weight can easily be accommodated by the on-camera flash unit. The RAY FLASH Adapter is made to fit the Canon 580EX, Canon 580EXII and Nikon SB-800, Nikon SB-900 flash units and due to the its large inner diameter the ringflash adapter will accept almost all lenses from Nikon & Canon. This model is compatible with: Minimize

Toroidal wire wound transformers. Conform with IEC 742 for ... Read more

Toroidal wire wound transformers. Conform with IEC 742 for class 11 installation of SELV lighting. Fitted with Fused secondary outlet. for dimming use Low Voltage Dimmers on the input side of the transformer Height: - 135mm Dia: - 112mm Minimize

Included in pack: 1x HERCULES Dualpix Infinite Webcam, 1x E ... Read more

Included in pack: 1x HERCULES Dualpix Infinite Webcam, 1x Ecological dust removal aerosol - 350 ml .The Hercules Dualpix Infinite webcam provides incredible quality pictures for video-conference calls.2-megapixel resolution means videos are smooth and sharp, even in low lighting conditions, while the microphone blocks out background noise and brings out voices.The Dualpix Infinite webcam also takes photos with resolutions as high as 7.6-megapixels (interpolated).Designed for both flat-panel computer monitors and laptop screens, the Dualpix Infinite webcam is the best way to chat over the internet.General:Device Type : Web cameraCamera:Type : ColourDigital Zoom : 3Still Image : - up to 30 frames per secondAudio Support : Yes : built-in microphoneImage Sensor:Type : CMOSLens Construction:Focus Adjustment : AutomaticInterfaces:Computer Interface : Hi-Speed USBExpansion / Connectivity:Interfaces : 1 x Hi-Speed USB - 4 PIN USB Type AMiscellaneous:Cables Included : 1 x USB cable - 1.8 mSoftware / System Requirements:Software Included : Drivers & UtilitiesOS Required : Microsoft Windows XP SP2, Microsoft Windows Vista SP1, Microsoft Windows XP SP3Peripheral / Interface Devices : CD-ROM, USB portSystem Requirements Details : Pentium 4 - 1.5 GHz - RAM 512 MB - HD 300 MB Minimize

Toroidal wire wound transformers. Conform with IEC 742 for ... Read more

Toroidal wire wound transformers. Conform with IEC 742 for class 11 installation of SELV lighting. Fitted with Fused secondary outlet. for dimming use Low Voltage Dimmers on the input side of the transformer Height: - 107mm Dia: - 108mm Minimize

Toroidal wire wound transformers. Conform with IEC 742 for ... Read more

Toroidal wire wound transformers. Conform with IEC 742 for class 11 installation of SELV lighting. Fitted with Fused secondary outlet. for dimming use Low Voltage Dimmers on the input side of the transformer Height: - 107mm Dia: - 108mm Minimize

MA Lighting 120201 Lightcommander LC II 24/6 - 24 single ch ... Read more

MA Lighting 120201 Lightcommander LC II 24/6 - 24 single channels via faders on 2 presets and flash buttons, 6 extra channels via pots, 'Wide' function for doubling channels to 48 channels on 1 preset, 'SWOP' disable and dimmer curve selectable per channel. List of channel values in display, 16 memory faders with flash button, 8 switch memories, 192 scenes on 8 pages, preview with percent value in display, master fader for presets and chaser, main master with blackout key, graphic display with bright background and contrast control. Key switch for "All Access", "Lock Programming" and "Lock Desk". Chase effects (up to 5,000 steps in 50 programs), speed selection via encoder wheel, sound activated or manual step key chase control with selectable fade time (4 chase programs per bank), manual X-fade or auto fade with pre-programmed times between presets, memories or sequence steps, selectable fade time via encoder or fader (can be modified even after fade has started), separate in and out fade time per sequence step, graphic display of X-fade status. 30 analogue outputs (0 to +10 volt) via Socapex EF 337 female DMX 512 (1990) with softpatch for 255 dimmer channels, graphic display of patch-list, MIDI in/out/thru, storage of all programs internally and optionally on memory card (programs interchangeable between 24 and 48 channel boards). Steel housing with solid wood side panels, XLR connector for desk lamps, Motorola 68000 CPU with 12MHz speed, independent operating system, DMX update rate faster than 30Hz, 100-260V power supply. Dimensions: 74 x 61 x 12.7cm. Weight: 16kg. Lighting / Light Controllers Minimize

MA Lighting Lightcomander 12-2 Desk - 12 or 24 (wide) chann ... Read more

MA Lighting Lightcomander 12-2 Desk - 12 or 24 (wide) channels, 1 or 2 presets with flash buttons per channel, 2x auxes, switches for fog/strobe etc, 12x memory faders (including flash buttons), preview of memories and chasers, menu function for easy set-up, LCD display, live and blind programming and modifications, swop-disable and dimmer curve per channel, 99x programs, 5x chases can be used at the same time using different times, programmable fade times, learn-speed, manual X-fade or fade time set on fader, go button. Made in Germany. Lighting / Light Controllers Minimize

Toroidal wire wound transformers. Conform with IEC 742 for ... Read more

Toroidal wire wound transformers. Conform with IEC 742 for class 11 installation of SELV lighting. Fitted with Fused secondary outlet. for dimming use Low Voltage Dimmers on the input side of the transformer Height: - 135mm Dia: - 112mm Minimize

Toroidal wire wound transformers. Conform with IEC 742 for ... Read more

Toroidal wire wound transformers. Conform with IEC 742 for class 11 installation of SELV lighting. Fitted with Fused secondary outlet. for dimming use Low Voltage Dimmers on the input side of the transformer Height: - 107mm Dia: - 108mm Minimize

Lucas Lighting LLZ111 Vehicle Bulb Kit H7/ H1

Stylish Fitting with Sealed Angled Prismatic Controller APP ... Read more

Stylish Fitting with Sealed Angled Prismatic Controller APPLICATIONS Suitable for Domestic and Commercial applications, such as offices, shops, kitchens Formed in white metal work with angled sides and contrasting grey end caps which are screwed to Minimize

Lucas Lighting LLZ107 H1 Vehicle Bulb Kit

JB-Lighting Fader for Licon 1 and Scancontrol 1612 Lighting ... Read more

JB-Lighting Fader for Licon 1 and Scancontrol 1612 Lighting / Lighting Accessories Minimize

JB-Lighting Fader for Licon CX & 1X Lighting / Lighting Acc ... Read more

JB-Lighting Fader for Licon CX & 1X Lighting / Lighting Accessories Minimize

bow and drill friction fire lighting kit about 4 years ago ... Read more

bow and drill friction fire lighting kit about 4 years ago i attended a bushcraft course alongside 12 students who where attending one of the college courses i teach on and for the first time i encountered friction fire lighting using bow and drill the instructor and owner of the bushcraft school was a guy called dave watson who is widely renowned as one of the uk s number one experts in friction fire lighting i reckon most people would say he is the no 1 expert dave managed to successfully teac Minimize

Trough Metal Reflector A trough reflector suitable for use ... Read more

Trough Metal Reflector A trough reflector suitable for use with single and twin lamp Lightpack luminaries (Not suitable for LPH/LPF). APPLICATIONS Factories, schools, workshops, garages etc. Made from steel and coated with a heat cured high g Minimize

Q5 Cree LED Bike Front Light: Increase the safety of cycli ... Read more

Q5 Cree LED Bike Front Light: Increase the safety of cycling! New Q5 CREE LED Waterproof Bike Front Light. Shock resistant design. Pocketable Size. Output power: 7 Watt, Cree Q5 LED, brightness can come to 450 lumens [lm]. Skid-proof & waterproof design. Reflector: convex lens. Internal wiring applies the high efficient booster circuit, working voltage is wide and can utilize the batteries in the largest extent. Solid built, Aluminum alloy casing. Zoom In/Out to adjust its Focus: x1, x100, x250, x500, x1000, x2000. Switch Mode: On / Off / Flash Specifications: * Power: 3 x AAA Batteries OR 1 X 18650 Battery (BOTH NOT Included) * Dimensions: 140mm(L) x 60mm(W) x 40mm(D) Mount Holder: Rubber Matting for Shock and Slip Resistance. Antiaging elements are added to rubber compound for long-term service. Suitable for 26-28mm Diameter Flashlight and 16-33mm Diameter .Handlebar Silicone Bike Front Rear Light (ZK-2) (White+Red): New 2 LED Bicycle Bike Front & Rear Strobe Light. Integreted clipping, easy to instal and fit. Water resistant. Flexible silicon body. Single button operation. Visible over 600m. 3 Modes: flash/ slow flash/steady. Specifications: * Power: 2 x CR2032 Batteries (Included) * Dimensions: 90mm(L) x 31mm(W) x 30mm(D) Packing include : * Q5 Cree LED Waterproof Torch x 1 * Flashlight Bicycle Holder x 1 * 2 LED Silicon Bike Light (Red) x 1 * 2 LED Silicon Bike Light (White) x 1 **Battery are inlcuded and installed Minimize

LumiDMX Basic + X13D Basic Bundle. LumiDMX is an innovative ... Read more

LumiDMX Basic + X13D Basic Bundle. LumiDMX is an innovative solution to control lighting systems via PC. In combination with an USB-DMX Interface, LumiDMX enables control of up to 16 DMX Universes. Multimedia Timeline With the integrated Multimedia Timeline, you create instantly complex and perfectly synchronized audio/light shows. Using a beat analysis function, lighting sequences can be adapted automatically to the pieces of music. Due to easy handling by means of Drag & Drop, your show is created with just a few clicks! It is an easy handling and still highly flexible. Effect Generator Perhaps, you want an automatically generated and delayed cornering of your intelligent lighting. No problem. With a few clicks, the effect generator creates your lighting sequence very easy. Also gradients or chaser can be realized with lightning speed. Live Panel & Designer Whether controlled by a touch panel or not, you always have everything in view. With the live panel designer, you can design your own customized control surface. This is also easy and quickly handled by Drag & Drop. Whether shows, sequences or pictures, paste and get going! You can also remote control your complete live panel with all objects by MIDI or shortcuts. Device Library LumiDMX is delivered with a device library including over 50 manufacturers. You can also add your complete lighting inventory to your project. Already included are all settings for light, gobos, shutter and colors ect. In case that a device is not included, you can create it by yourself with the integrated ScanEditor or we do it for you. NEW! Real-time 3D simulation included! Brand new, the supplied real-time rendering software LumiDMX3D. This simulator is able to preprogram your complete show in 3D with an amazing level of reality. All devices are patched automatically. By a powerful function named DMX transformation, it is possible to realize complete stage technology systems like curtains, turntables, winches, lifts and much more. All that by DMX! This is just a small part of the powerful range of functions of LumiDMX! At www.lumidmx.com, you can download the latest version of LumiDMX at any time. Highlights:- Multimedia Timeline with BPM Analysis - Up to 16 DMX Universes- Device Library - Device Groups and Subgroups- Effect Generator - 2D-View- Live Panel & Designer - LumiDMX3D Real-Time Visualization included - 3D-ESP Vision Support- 3D-WYSIWYG Support - Shows, Sequences, Cues unlimited- Macros & Command Line - MIDI & BPM Triggering - Free Update and Support available- And much more! Minimum system requirements: - Windows 32/64Bit–XP/Vista/Seven - 1GHz Processor–256MB of RAM (recommended 1GB) - 128MB of Graphics memory (Pixel shaders 2.0 recommended) - 200MB of Free disk space - Display resolution of 1024x768 (higher recommended) - CD-ROM (for installation from CD)–USB 1.0 or USB 2.0 Scope of delivery (Download version): USB Security dongle, ENTTEC Open DMX USB Interface, software download at www.lumiDMX.com LUMIDMX X1 LIGHTING CONTROL X13D BASIC (order code 254676), ENTTEC OPEN DMX USB INTERFACE (order code 245892) Lighting / Light Controllers Minimize

Complete Light-Set including STAIRVILLE 406 Pro II Controll ... Read more

Complete Light-Set including STAIRVILLE 406 Pro II Controller, 4x 4 Amp., 2 x 8 Pol. Bulgin Out 19"/2U Sound to light, bass chase, 32 programms, dimmable, with footswitch input. Also included in the package: 4 PAR 56 Spots with 300W NSP Lamp, 1 Light stand in black (120-260cm, 3.7kg), 4colors for PAR56, all cables and adapters. STAIRVILLE 406 KOMPAKT 19" CONTROLLER (order code 155982), 4 pc. STAIRVILLE PAR 56 SHORT BLACK (order code 121379), STAIRVILLE MULTICABLE 10M 8PINB-4 SOCKETS (order code 133602), 4 pc. SYLVANIA PAR56 300 W NSP 2000H (order code 227899), MILLENIUM SLS6 LIGHTING STAND (order code 121074), LEE COLOUR FILTER SET PAR56 4PCS. (order code 120698) Lighting / Light Sets Minimize

Complete Light-Set including STAIRVILLE 406 Pro II Controll ... Read more

Complete Light-Set including STAIRVILLE 406 Pro II Controller, 4x 4 Amp., 2 x 8 Pol. Bulgin Out 19"/2U Sound to light, bass chase, 32 programms, dimmable, with footswitch input. Also included in the package: 4 PAR 56 Spots with 300W NSP Lamp, 1 Light stand in black (120-260cm, 3.7kg), 4colors for PAR56, all cables and adapters. STAIRVILLE DC-405B LIGHTING CONTROLLER (order code 170699), 4 pc. STAIRVILLE PAR 56 SHORT ALU (order code 124779), STAIRVILLE MULTICABLE 10M 8PINB-4 SOCKETS (order code 133602), 4 pc. SYLVANIA PAR56 300 W NSP 2000H (order code 227899), MILLENIUM LST-250 LIGHTING STAND (order code 186229), LEE COLOUR FILTER SET PAR56 4PCS. (order code 120698) Lighting / Light Sets Minimize

Stairville easy lighting Maxi package (silver) comprising: ... Read more

Stairville easy lighting Maxi package (silver) comprising: [Lee PAR64 Colour Gel 4-Pack], [Stairville 4-Way Mains Extension Cable], [Millenium LST-250 Lighting Stand ], 4 pcs. [Stairville PAR64 With Plug], 4 pcs. A1 500, 4pcs. Raylight reflector 4 pc. STAIRVILLE PAR 64 LONG ALU (order code 176060), STAIRVILLE MAINS EXT. 4-WAY 10M 1,5MM² (order code 168061), 4 pc. STAIRVILLE RAYLIGHT REFLECTOR FOR PAR 64 (order code 100572), MILLENIUM LST-250 LIGHTING STAND (order code 186229), 4 pc. OMNILUX 500W A1 GY9,5 LAMP (order code 168029), LEE COLOUR FILTER SET PAR64 4 PCS. (order code 120699) Lighting / Light Sets Minimize